Sigma-galant.com

I have the gear stick out and can’t move the shaft into another gear. It moves forward and backward but not side to side. The bushing it cranked and I have a replacement on the way.

I just swapped my 78 colt from auto to manual, I used a km110 and when I pulled it from the donor car ow oils go through the gears fine. Now that it’s in my car it’s stuck in 3rd. All I did to it was change the output shaft seal, drop the pan and change the gasket and put new fluid in it. Checked th...

http://www.sigma-galant.com/viewtopic.php?f=30&t=2206

That should answer my questions!

I just came across this thread, I dont know how correct the info is. They state that the 4g32 is a narrow block engine, which means that it would be the same as fwd manual transmission cars. Does anyone have anything to add to that?

I searched through this site and did not come across any threads on this swap, I apologize if I missed them. I am considering the idea of swapping a 4g63 or 64 into my 78 colt. There seems to be a lot of info on swapping them into d50s and other vehicles, but not too much on the lancer/colt. My car ...

Hey everyone, I just scored a clean 78 Colt, the car is in great shape. It has a few rust spots, but for this area its clean. It has 25K original miles, mechanicaly and interior that shows. It got a decent respray sometime in its life. The car sat since 2000, so when I got it I replaced anything tha...