hey man, his car is looking awesome!!
so the engine plans are a n/a 4g63 sohc or are you going turbo out of the starion?
either way i think its time for a update
Nick
Search found 143 matches
- Wed Jul 07, 2010 12:15 am
- Forum: Builds
- Topic: My GC Hardtop project
- Replies: 1020
- Views: 1182352
- Sat Jul 03, 2010 9:12 pm
- Forum: Sigma's Section
- Topic: Sigma wagon jap 5 speed noises
- Replies: 1
- Views: 436
Sigma wagon jap 5 speed noises
Hi guys Since ive been away from the sigma thing for a while (my GE had rust everywhere and i lost enthusiasm in a full on project) and ive been looking for a daily i had a look on carsales for a sigma, and hey peresto i found this: http://www.carsales.com.au/all-cars/dealer/details.aspx?R=8919257&a...
- Wed Apr 07, 2010 9:19 pm
- Forum: Sigma's Section
- Topic: Hopper stoppers brake upgrade
- Replies: 78
- Views: 44099
Re: Hopper stoppers brake upgrade
:stupid: i wasnt asking about the set up just the brackets and hubs, i reckon i could do the foot work on the rotors, pads and calipers. But im in favour of the ford falcon or holden commodore calipers :$ i just think it will be much much easier to get the calipers off wreckers and so on. Thanks Nick
- Mon Apr 05, 2010 8:41 pm
- Forum: Builds
- Topic: My GE sigma project.
- Replies: 3
- Views: 1001
Re: My GE sigma project.
newly updated
Nick
Nick
- Mon Apr 05, 2010 5:50 pm
- Forum: Sigma's Section
- Topic: Hopper stoppers brake upgrade
- Replies: 78
- Views: 44099
Re: Hopper stoppers brake upgrade
stealth, so can u give us some figures for the billet hub and the bracket? this sounds awesome! front runners here i come lol ill need it in ford pattern if it will change figures? If its cheaper ill be happy to do my leg work to find calipers,rotors and so on for my car but as to bolts, washers and...
- Thu Mar 04, 2010 10:30 pm
- Forum: General/Technical Chat
- Topic: Plans for my car... give me your suggestions!
- Replies: 0
- Views: 1200
Plans for my car... give me your suggestions!
Hi guys Nick here im decided im sticking with the GE sigma drag car as long as i can find some doors :| so here are my plans and i would love it if any of you could give suggestions, critism etc that would be great :P Engine: 351 cleveland maybe stroked to 408ci with forged pistons, good rods and fo...
- Thu Feb 25, 2010 9:55 pm
- Forum: Events » Event Photo Album » Cruise Register
- Topic: brissie cruise
- Replies: 54
- Views: 8694
Re: brissie cruise
april 18 come on guys lets get the ball rolling, april 18 is good for me, i have a question will it be alright if a 1987 bmw 318i is there?? (thats only if i cant find a mitsu in the time frame) does anyone know of any good twisty roads around the goldy/brissy area? i can only think of out back of m...
- Wed Feb 24, 2010 9:37 pm
- Forum: Galant's Garage
- Topic: play in steering?
- Replies: 16
- Views: 2006
Re: play in steering?
to check ur tie rod ends:
Putt front of car in air and wigle the wheels from side to side (trying to point wheel left and right) but dont yank just wigle if wheel moves without steering wheel moving then tie rod ends are stuffed learnt it today at work
Nick
Putt front of car in air and wigle the wheels from side to side (trying to point wheel left and right) but dont yank just wigle if wheel moves without steering wheel moving then tie rod ends are stuffed learnt it today at work
Nick
- Wed Feb 24, 2010 6:15 pm
- Forum: General/Technical Chat
- Topic: JET.51G's problem
- Replies: 27
- Views: 5341
Re: JET.51G's problem
okay mate no worries
Nick
Nick
- Tue Feb 23, 2010 10:43 pm
- Forum: General/Technical Chat
- Topic: JET.51G's problem
- Replies: 27
- Views: 5341
Re: JET.51G's problem
do u mean next monday u might be driving up or the 15th??
if so just tell me so i have ur money ready for the turbos?
oh yea and how about those pics?
Nick
if so just tell me so i have ur money ready for the turbos?
oh yea and how about those pics?
Nick
- Sun Feb 21, 2010 9:51 pm
- Forum: General/Technical Chat
- Topic: What are your favourite 8cyl, 6 cyl and 4cyl motors?
- Replies: 40
- Views: 6868
What are your favourite 8cyl, 6 cyl and 4cyl motors?
be interesting to see what people think are the best 4, 6 and 8 cyl motors in existance? Mine are: 8cyl = 426 hemi/ which became the 511ci hemi used in drag racing (top doorslammers etc.) 6cyl = RB26DETT or 2JZGTE (sounds soooo goood) or even a ford xr6T motor on full noise sounds nice :wank: 4cyl =...
- Sat Feb 20, 2010 9:11 pm
- Forum: Events » Event Photo Album » Cruise Register
- Topic: brissie cruise
- Replies: 54
- Views: 8694
Re: brissie cruise
i reckon this is an awesome idea :P id definately in if i can sit in the passengers seat lol not old enough to drive yet dam it! But it would be awesome to see some old mitsu around here, just a suggestion but why not cater for the gold coast boys and meet up like half way and cruise out to willowba...
- Sat Feb 20, 2010 9:04 pm
- Forum: Events » Event Photo Album » Cruise Register
- Topic: NSW Parramatta Cruise Discussion topic
- Replies: 60
- Views: 11545
Re: NSW Parramatta Cruise Discussion topic
i really need to get a sigma/galant street car up here lol but no one selling anything good for the right money so if i find one im definitely in for a cruise just so its after march so im on my l's and can drive lol
Nick
Nick
- Sat Feb 20, 2010 8:48 pm
- Forum: Transmission/Drivetrain
- Topic: To 9 inch or vl turbo?
- Replies: 16
- Views: 2593
Re: To 9 inch or vl turbo?
dont worry dan, they will be coming lol just the motor choice a tad diff than what i explained above itll be a cleveland not a windsor but still a 351 efi and two turbos maybe T4s? depends how i go when my dead 'measuring' turbo shows up. im gonna test fit the clevo in when my turbo gets here ill ta...
- Wed Feb 17, 2010 1:05 pm
- Forum: Suspension/Brakes/Wheels
- Topic: GH struts
- Replies: 8
- Views: 1010
Re: GH struts
are GE struts the same as GH struts? i need to change my front stud pattern to 5 stud as well (front runners only come in 5 stud) and im putting in a big motor so i will need heavy duty springs? is there such thing?
if you can do this to a GE amgis_obrut can u price a kit for us?
Thanks Nick
if you can do this to a GE amgis_obrut can u price a kit for us?
Thanks Nick
- Thu Dec 17, 2009 8:03 pm
- Forum: Members Rides
- Topic: TUFSIG, GK Sigma GSR 2.6 EFI Turbo
- Replies: 407
- Views: 355451
Re: TUFSIG, GK GSR 2.6 EFI Turbo, From the Start
thats why i was checkin id hate to see TUFSIG in the garage again lol it needs to be on the road!
sounds like a good setup
pitty u in victoria i wanna see what this will do down the strip aye ;)
Nick
sounds like a good setup
pitty u in victoria i wanna see what this will do down the strip aye ;)
Nick
- Thu Dec 17, 2009 7:51 pm
- Forum: Sigma's Section
- Topic: How hard/expensive to engineer this car?
- Replies: 4
- Views: 879
Re: How hard/expensive to engineer this car?
i stand corrected
Nick
Nick
- Wed Dec 16, 2009 4:49 pm
- Forum: Sigma's Section
- Topic: How hard/expensive to engineer this car?
- Replies: 4
- Views: 879
Re: How hard/expensive to engineer this car?
you would have to take the rear seats out and change seating to 2 instead of 4 coz of the cage :S
shouldnt be to hard maybe have to upgrade brakes then that would be about it im guessing?
Nick
shouldnt be to hard maybe have to upgrade brakes then that would be about it im guessing?
Nick
- Wed Dec 16, 2009 4:46 pm
- Forum: Members Rides
- Topic: TUFSIG, GK Sigma GSR 2.6 EFI Turbo
- Replies: 407
- Views: 355451
Re: TUFSIG, GK GSR 2.6 EFI Turbo, From the Start
GT35 hmmm sounds like it'll be a weapon
thats the turbo off a xr6 isnt it?
one other question is you 2.6 motor built? or are you just gonna keep it stock? (pistons, rods etc.)
Nick
thats the turbo off a xr6 isnt it?
one other question is you 2.6 motor built? or are you just gonna keep it stock? (pistons, rods etc.)
Nick
- Tue Dec 15, 2009 8:09 am
- Forum: Transmission/Drivetrain
- Topic: To 9 inch or vl turbo?
- Replies: 16
- Views: 2593
Re: To 9 inch or vl turbo?
a 9 inch diff isnt the be all and end all of diffs.. have seen plenty of them drop their guts all over the road/race track think about the power its gonna cost ya to run the thing too Yea mate i no thats why i have this thread hehe i wanted to see if anyone had a better idea. what about the patrol ...
- Fri Dec 11, 2009 5:31 pm
- Forum: General/Technical Chat
- Topic: Getting a cams license?
- Replies: 2
- Views: 742
Getting a cams license?
Hey guys, im looking at getting a cams license for my e30 beemer for the occasional thrash out at queensland raceway :) in safety, without cops and speeding fines :) it says i need to be joined to a cams affiliated car club, how do i go about this? how do i no its a cams affiliated club? is there an...
- Thu Dec 10, 2009 5:34 pm
- Forum: Builds
- Topic: GH Sigma EFI 351 V8
- Replies: 278
- Views: 193828
Re: G spec GH
maybe a bit different bit powdercoated black/grey if u dont like that?
i personally like black rims, but its really a love it or hate it thing
just my thoughts
Nick
i personally like black rims, but its really a love it or hate it thing
just my thoughts
Nick
- Wed Dec 09, 2009 8:34 am
- Forum: General/Technical Chat
- Topic: nice fuel leak
- Replies: 14
- Views: 1209
Re: nice fuel leak
wow thanks a sheet load mate, obviously i pay fuel and give u a carton when u get here now i have a bigger area to look at
Thanks
Nick
Thanks
Nick
- Tue Dec 08, 2009 6:30 pm
- Forum: General/Technical Chat
- Topic: nice fuel leak
- Replies: 14
- Views: 1209
Re: nice fuel leak
well thats a bummer hehe ill have to look harder then lol theres no GE's at all around the gold coast that part sucks about here, but its all good i have one, no one understands why i need two they just dont get it when i tell them i need more hehe Thanks anyway Nick P.S when you move up here ill ne...
- Tue Dec 08, 2009 5:55 pm
- Forum: General/Technical Chat
- Topic: nice fuel leak
- Replies: 14
- Views: 1209
Re: nice fuel leak
13bsigma, when u move bring at least one of you ge's i need to buy a first street car next year sometime... u may have a buyer hehe all other sigmas and galants up here are either rusted heaps of sh_t or the owners are grannys who never wanna let go and want 6g for it...
Nick
Nick
- Tue Dec 08, 2009 12:10 pm
- Forum: Transmission/Drivetrain
- Topic: To 9 inch or vl turbo?
- Replies: 16
- Views: 2593
Re: To 9 inch or vl turbo?
im gonna be running big wheels hehe with this setup maybe 8 or 9 in wide on back.
then i go the big boy set up when i say big boy i mean huge hehe. so i want a diff that i dont have to replace when i go big. (big boy setup: (one day) twin turbo efi 351 windsor big power )
Nick
then i go the big boy set up when i say big boy i mean huge hehe. so i want a diff that i dont have to replace when i go big. (big boy setup: (one day) twin turbo efi 351 windsor big power )
Nick
- Mon Dec 07, 2009 11:17 am
- Forum: Transmission/Drivetrain
- Topic: To 9 inch or vl turbo?
- Replies: 16
- Views: 2593
To 9 inch or vl turbo?
ive pulled the rear out of my sig with plans of fitting a newer more hardcore diff, for drag racing of course, it will have a 302 with and easy 300hp (only doing cam, carby, extractors and a performer manifold) and a c4 auto, now im stuck with the diff as the 9in is more conventional coz they are st...
- Thu Nov 26, 2009 5:10 pm
- Forum: Engine
- Topic: More random v8 questions...
- Replies: 5
- Views: 911
Re: More random v8 questions...
hmm so thats why some guys put clevo heads on there windsor, will 351 clevo heads fit on a 302 windsor? Im not wanting anything special just maybe 9s @ 140mph with gas but i saw this nitrous kit the 'BIG SHOT' on the american autos website : (www.americanautos.com.au) For squarebore carbs that can g...
- Tue Nov 24, 2009 8:53 pm
- Forum: Engine
- Topic: More random v8 questions...
- Replies: 5
- Views: 911
Re: More random v8 questions...
im unsure as i said just random questions lol im looking at about 11-12 :1 comp? i was thinking that if i bulid a windsor with nitrous i dont really have to work it that hard to get power out of it (eg, head porting etc) but the basic rebulid is on the cards, with higher comp pistons and stronger ro...
- Tue Nov 24, 2009 4:06 pm
- Forum: Engine
- Topic: More random v8 questions...
- Replies: 5
- Views: 911
More random v8 questions...
Hey as it says need to know a few things: 1st is if i have a 302 with tunnel ram manifold how big carbies do i need (drag racing so full throttle most of the time) Holley 465s? 2nd if i was to put nitrous on board is there a tunnel ram plate nos kit or do i have to buy 2 kits and adapt and tune them...