Sigma-galant.com

Ok guys I am confident that you are correct....stuff it. Will press it in again see what happens with roadworthy. ...

Ok, so has anyone come across this problem before. I am trying to find replacement ball joints for my GA Galant. I have physically looked at and pressed in both BJ116 and BJ122 ball joints, but they sit too high on the top side of the control arm where the circlip goes by about 2mm. The original one...

You're Welcome Taz.

hI GUYS, JUST SOME AA GASKETS PART NUMBERS FOR A 4G32, THOUGHT THESE MIGHT COME IN HANDY FOR SOME OF US TACKLING REBUILDS.... IGNORE THE SUBMIT FIELD /// ITS JUST ME BEING LAZY WITH CUT AND PASTE THATS ALL....HOPE THIS SAVES ON :google: TIME WASTING. Item List Print these details Print TecTip Descri...

http://www.google.com.au/imgres?imgurl=http://i61.tinypic.com/2gt2cfp.jpg&imgrefurl=http://www.sigma-galant.com/viewtopic.php?f%3D30%26t%3D12076&h=640&w=480&tbnid=s3FP7YIPzF2zzM:&docid=B2vkoFcKgVk0mM&ei=JIgjVsbaD4OrmAXg3YaQBQ&tbm=isch&ved=0CB0QMygBMAFqFQoTCMb87OD6y8gC...

.15 mm inlet side .25mm exhaust side with engine hot.

GA to GD and GTO switches are the same I believe. Only difference being plug wiring. I am sure if you got a later model switch you could swap the plugs and or wiring over to suit your car.

Thanks for clarifying this A112H...MAKES LIFE EASIER!

GA to GD and GTO switches are the same I believe. Only difference being plug wiring. I am sure if you got a later model switch you could swap the plugs and or wiring over to suit your car.

Thanks for clarifying this A112H...MAKES LIFE EASIER!

Combination Switch ie; Wiper/Indicator switch and assembly that goes around steering column, inclusive of the Hazard switch.

Does anyone have a GA combination switch and a black door trim for drivers front door that isnt broken? is of no use GOD DAMN IT!

WAGS - What did they sting you to do that do you remember?

Get the ones you have reset.

Thanks Dave, Any idea if the can be reset and lowered at the same time, want about 2 inches down, and can't use lowering blocks ( Legally anyway ) In Victoria.

Can anyone tell me if they have had any luck in finding a supplier that sells new leaf springs for a GA? I've searched high and low, but to no avail, or even a place that can reset them?

Dear EVERYONE! I want to send a HUGE thankyou to GAPHIL for all of his help and the sale of his GA to me today. I went over the car with a fine tooth comb when I got it home and I was blown that there is really little to do to the car, Minor bits and pieces really, and it runs like a dream, but ther...

Welcome to the orum, if youre interested I know of a guy here in Melbourne that has 4 GC sedans that he'd part with pretty damn cheap....contact me if you want a project! I'll put you in touch with him if you like.

They should bolt straight in (I'm pretty sure GA's are the same mounting as the GB/C/D's, and no you don't have to stick with Galant seats.

Thanks Dave and 71GA....answered my questions...thanks guys/ I have got two GC hi backs organised so happy days!

:\ Can anyone tell me what seat will directly swap for the low back GA seat to retrofit them for a bucket seat. As in seat rail mod required. I want to know whether any Sigma seats will bolt straight in or do I have to stick with Galant seats and if so what series, GC or GD will bolt straight in any...

@TAZ thanks mate. will try that, @DAVE >>>you better believe it. I have waited 20 years to find one and this is going to be my third child! Took long enough to get approval from the Minister of Interior Affairs ( read wife ) too. I can assure you it will be VERY much loved and cared for. This car ha...

So what does - H41 809 represent then ....anyone?

Thanks stealth. That make me feel a little more optimistic! :-)

@75Wagon --- Sure am!

Hi guys, I was wondering whether anyone can tell me if the clusters or the speedo drive cables are more prone to failing causing GA speedos to stop working. I am about to buy PHILS GA and just wondering where I'll start.