Search found 12 matches
- Thu Jun 07, 2018 1:20 pm
- Forum: Sigma's Section
- Topic: Original Turbo inlet/exhaust/carby/turbo setup worth?
- Replies: 6
- Views: 7199
Re: Original Turbo inlet/exhaust/carby/turbo setup worth?
I have purchased a few kits that are not 100% complete. to build the most 100% complete kit I can. generally they are worth between 6000-1500 depending on condition and how complete the kit is. but individually you can get good money for each item individually exhaust manifold wastegatte dump pipe c...
- Fri May 19, 2017 10:42 am
- Forum: Sigma's Section
- Topic: Sigma turbo rebuild
- Replies: 6
- Views: 2519
Re: Sigma turbo rebuild
welcome,
did it come with lots of spares? i remember seeing pictures with turbo housings and so forth kicking about in the foot wells
did it come with lots of spares? i remember seeing pictures with turbo housings and so forth kicking about in the foot wells
- Thu Nov 03, 2016 6:54 pm
- Forum: Sigma's Section
- Topic: Sigma turbo drain with power steering
- Replies: 3
- Views: 2412
Re: Sigma turbo drain with power steering
About 10 years ago I parted ways with a Starion that had a 2.6L turbo with efi. It was running factory Starion power steering. The previous owner did the conversion and ran the pump and reservoir higher up which I presume would have allowed all of the space issues to be cleared up. Of the two GH's I...
- Wed Nov 02, 2016 7:14 am
- Forum: Sigma's Section
- Topic: Sigma turbo drain with power steering
- Replies: 3
- Views: 2412
Sigma turbo drain with power steering
Hi guys, how have people achieved fitting turbo drain/return lines to the sump when power steering is fitted?
From what I have read, the factory sump will foul. And the area looks quite busy.
Any suggestions or previous experiences?
From what I have read, the factory sump will foul. And the area looks quite busy.
Any suggestions or previous experiences?
- Mon Oct 17, 2016 7:59 pm
- Forum: Sigma's Section
- Topic: GH SE reclining seat.
- Replies: 5
- Views: 2862
Re: GH SE reclining seat.
At this stage it's not high on the list. The front seats are genuine turbo fabric but rear seat and door trims are SE versions.
- Sun Jul 31, 2016 9:31 pm
- Forum: Sigma's Section
- Topic: GH SE reclining seat.
- Replies: 5
- Views: 2862
Re: GH SE reclining seat.
Mounted up the mechanism today. Now I just need to make some clearance on the bolts for the top two keyhole mount holes. Then i have to chop out half of the parcel shelf to allow for the seat to actually recline.
- Sat Jul 30, 2016 9:54 pm
- Forum: Sigma's Section
- Topic: GE sigma gearknob removal
- Replies: 5
- Views: 2194
Re: GE sigma gearknob removal
Circuit should have been circlip. All I had to do to get my knob off was Remove the circlip and pull my stick real hard and the knob and stick came off.
- Sun Jul 17, 2016 5:05 pm
- Forum: Sigma's Section
- Topic: GE sigma gearknob removal
- Replies: 5
- Views: 2194
Re: GE sigma gearknob removal
I found a circuit at the bottom of the chrome shaft that needs removal...i reckon once that's out something is gonna give.
- Sun Jul 17, 2016 2:40 pm
- Forum: Sigma's Section
- Topic: GH SE reclining seat.
- Replies: 5
- Views: 2862
Re: GH SE reclining seat.
Sourced a reclining mechanism. Hopefully pick it up this week and it will clear up a few things.
- Sat Jul 16, 2016 8:33 pm
- Forum: Sigma's Section
- Topic: GE sigma gearknob removal
- Replies: 5
- Views: 2194
Re: GE sigma gearknob removal
From memory I haven't seen one, but would expect one from previous cars. will have a look tomorrow
C_furnace is a name I remember from 10 years ago on the AUstarion forum when I had a Starion with the plates GADGET.
C_furnace is a name I remember from 10 years ago on the AUstarion forum when I had a Starion with the plates GADGET.
- Sat Jul 16, 2016 2:58 pm
- Forum: Sigma's Section
- Topic: GE sigma gearknob removal
- Replies: 5
- Views: 2194
GE sigma gearknob removal
Any tricks? It seems the whole chrome shaft and knob just keep spinning.
The previous owner of my GH fitted a manual drive train from a GE. I want to run the GH SE centre console. And need to get the knob off to go through the gearstick boot.
The previous owner of my GH fitted a manual drive train from a GE. I want to run the GH SE centre console. And need to get the knob off to go through the gearstick boot.
- Sat Jul 16, 2016 1:34 pm
- Forum: Sigma's Section
- Topic: GH SE reclining seat.
- Replies: 5
- Views: 2862
GH SE reclining seat.
Has anyone got pictures of the GH SE, rear seat reclining mounts and mechanism? I am doing a GH turbo replica (will start another thread soon). I acquired a GH GL parts car for its retro fitted blue SE interior and it has the reclining rear but not lever mechanism. The previous owner obviously hit a...