Sigma-galant.com

I have purchased a few kits that are not 100% complete. to build the most 100% complete kit I can. generally they are worth between 6000-1500 depending on condition and how complete the kit is. but individually you can get good money for each item individually exhaust manifold wastegatte dump pipe c...

welcome,

did it come with lots of spares? i remember seeing pictures with turbo housings and so forth kicking about in the foot wells

About 10 years ago I parted ways with a Starion that had a 2.6L turbo with efi. It was running factory Starion power steering. The previous owner did the conversion and ran the pump and reservoir higher up which I presume would have allowed all of the space issues to be cleared up. Of the two GH's I...

Hi guys, how have people achieved fitting turbo drain/return lines to the sump when power steering is fitted?

From what I have read, the factory sump will foul. And the area looks quite busy.

Any suggestions or previous experiences?

At this stage it's not high on the list. The front seats are genuine turbo fabric but rear seat and door trims are SE versions.

Mounted up the mechanism today. Now I just need to make some clearance on the bolts for the top two keyhole mount holes. Then i have to chop out half of the parcel shelf to allow for the seat to actually recline.

Circuit should have been circlip. All I had to do to get my knob off was Remove the circlip and pull my stick real hard and the knob and stick came off.

I found a circuit at the bottom of the chrome shaft that needs removal...i reckon once that's out something is gonna give.

Sourced a reclining mechanism. Hopefully pick it up this week and it will clear up a few things.

From memory I haven't seen one, but would expect one from previous cars. will have a look tomorrow

C_furnace is a name I remember from 10 years ago on the AUstarion forum when I had a Starion with the plates GADGET.

Any tricks? It seems the whole chrome shaft and knob just keep spinning.
The previous owner of my GH fitted a manual drive train from a GE. I want to run the GH SE centre console. And need to get the knob off to go through the gearstick boot.

Has anyone got pictures of the GH SE, rear seat reclining mounts and mechanism? I am doing a GH turbo replica (will start another thread soon). I acquired a GH GL parts car for its retro fitted blue SE interior and it has the reclining rear but not lever mechanism. The previous owner obviously hit a...