Sigma-galant.com

More years have past then outings in the car.

MiniMopar just sits in a garage with a car cover over in...


https://www.facebook.com/Mini-Mopar-139 ... =bookmarks

I used the factory dizzy in the car.

Actually took Mini Mopar to a local show recently. Noticed a few guy's scratching there head while looking at the car. A couple even asked if it had a 265 in it!!! I've also sourced a 2.6 engine from a Scorpion and disc brake diff. Now to workout how to change them over! http://i1022.photobucket.com...

When building Clevo's, always pull the dizzy out and run a socket down to the oil pump. Get a drill onto the socket and extension and prime away. Very important with a Clevo as they can have ordinary oil flow at the best of times. I'd nearly do the same thing for all engines. Will push the oil aroun...

Would like to end up with side draft carb's.
Already have a single side draft manifold for the 4G32 but no carb.
If I go down the 4G54 route, would try and do a twin side draft.

All inline with the 265 cui with swinging triple webbers!

Club reg paid this week. Bonnet scoop bolted down. Coolant changed. Might actually drive it for the first time in two years tomorrow!! http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170909_144333_zps3via0szg.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170909_...

Not that I think anyone is following this anymore.. http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170829_184527_zpsn5pmtpou.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170829_184548_zpsu9bj7jpz.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopa...

Some more progress pics.. http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170819_154930_zpsvqoqitie.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170819_154939_zpso1haoafr.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170819_154939_zpsnqq2v...

A little more progress.. http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170803_180022_zpsunnc5hwu.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170803_180027_zpskufn95pa.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170803_180045_zpssv7xnr...

I organized so "Free time" away from family this weekend. Jumped in the garage and started pulling Mini Mopar apart.. Before I started.. http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mopar/20170722_112016_zpsaty5axrc.jpg http://i1022.photobucket.com/albums/af341/MINTXB/Mini%20Mop...

I set up my account with them years ago and just this year it was pi%%ing me off trying to get to old pics to help people out....

Soo many add's, my PC would run like crap!!!

So what have I done to Mini Mopar recently? Nothing, I ended up fitting the electronic ignition gear ages ago and it works a treat. Renewed the club rego and just threw all the paperwork in the glove box. Car in now covered in almost 2 yrs of dust from being in the big garage BUT I actually had a gu...

Not a great deal, I have moved house twice and renovated the second while at the first! Mini Mopar is now in a 3 bay garage (with a pit) but all my efforts have been on the house! Funnily enough, I said to the misses last night... "I should pull out Mini Mopar and see how much air I can get in ...

Welcome mate.

The "search" function will be your new best friend!!

For the sake of others searching down the track...

I went with the Pertonix Ignitor II. (Model #91943)
I also got the matching Flame Thrower II coil.

It all took less than half an hour to install and was the cheapest incl freight from JEGS in the US.

If any of you are looking at stripping your engine bay....

Don't even bother with paint stripper.

This was all done with 1 "Flap disk"

Electric Boot Release. (Copied from my other car's build) Finally got around to installing/fabricating an electric boot release for the Pig. I have had electric boot release for almost as long as I can remember and you don't realise how much you use the boot and have to stuff around with the keys wh...

NOICE, I would have preferred a LB over a LC...

If I start to see spastics trying to sell sunglasses, I'll just blame Taz!!!

I must spend about 30min a day on the forum checking active topics every hour or so - so no effort wasted here lol Same thing with facebook really, so id do both. Yeah I'm the same really I normally spend minimum 30mins a night reading and re reading old posts (mainly build forums) Same goes with m...

I already moderate another forum but it has really died off over the last few years... (facebook)
I check this site everyday as you'll see from my logs..

The electronic ignition gear has arrived.
Pertronix Ignitor II
Pertronix Flamethrower II Coil (Chrome one)
...and a "JEGS" Chrome coil bracket.

Let's hope I get time to fit it all over the weekend!

Jacking the rear of the bonnet can cause swirl BUT are you going quick enough for that to be an issue?
Do you need cold air in or hot air out??

I'd suggest calling "progas" then.

Like I mentioned, the mob that did mine wired the tank to my gauge.

Had not been done when I bough the car..

Where are you based?

I took my old XB Pano to a local LPG place and they wired the tank up to my factory XB GT dash and it was spot on!

Had the tyres stripped off the factory rims and fitted to the mags over the weekend. Also ordered a Pertronix Ignitor II and matching coil to pi55 off the points ignition. I'm hoping the Pertronix set up is as easy to install as the one I fitted to my Cleveland V8 a few years ago. I also advanced th...