Sigma-galant.com

Count me in. Hopefully it wont clash with xmas stuff too much

Well hi all I didn't see any S-G guy s or gals but i went anyways it was a great day as it was sparsely entered so lots of runs got in i took the family truckster, (VK wagon) and had a ball look out for more in the future ,i will be there results , http://www.natsoft.com.au/cgi-bin/results.cgi?19/12...

A good friend of mine sent me an email of which i am posting up here I am taking my daily drive (non Mitsubishi) to have some fun come and join in on the fun ,(or beat my non mits ride) Subject: TAMPERED MOTORSPORT - December 19th Winton SHORT TRACK DAY Christmas is fast approaching us, and once aga...

last time i was at centre rd wreckers clayton they had a few LA 's and LB's 4 door
look em up http://melbourne.citysearch.com.au/E/V/ ... /34/4.html

congrats on the BS ride you had to take to get a simple outcome

oh, the lathe sounds SO SWEET humming away

while you are down at the local bowls shop ,

get one of those nodding dogs

seriously, "ive been to glebe/echuca/hahndorf/etc " bumper sticker

or an oversized RACQ/NRMA/RAC/RACV grille badge

some silly ideas

way cool, its sorted now ;)

given it is a magna ,check the battery cable at terminal ,it gets rotten inside, poke your test light probe into the CABLE bout an inch from the plastic terminal 'round the positive terminal give it a start atempt, if the test light goes out ,chop off the red terminal ,put on an aftermarket unit som...

OR
here in Mexico (vic)

oil in sump?

pickup installed without hittin the bottom of the sump ??

As much as i am ashamed ,
starter motor on a lada niva takes six hours

take out the steering column and off with the intake manifold ,bloody ruskies

lesson, DONT work on Ladas........ EVER

Way to go Dan ,show all the neysayers how to do stuff Pioneering Fast cars of yesteryear were never built of parts from a shelf THEY were built using bits they could get their hands on and cobbled together to give a desired result just as you have done Bravo for thinking outside the box, just 'caus...

Does anyone know of the figures of a Sigma factory turbo A/R specs ?????

karl_2ltgc wrote:Brakes look like volvo 4 spots and commodore discs, whats the go there?

dead right Karl, just my way to STOP, and keep stopping ;)

should compliment the rear disc brakes

I used a delco T/B and neck welded onto my EFI 2.6 in the LA

I did similar to panda ,i had it welded on at an angle pointing down a bit and out

I cut off the idle air control ,then it fits

ur a legend man just cnfirmiing one thing, the red vacuum is a 2 speed thingy, i took it out and it is like a valve or jet thingy, just wondering if it lets more fuel in when the vacuum is strong? so if its not vacuumed then low fuel low power all the time?? or should i remove the whol thing, take ...

here is some work on the brakes

you can get them, but the last 1 i seen was $800 better option, and cheaper option, would be cut down a diff from something else im goin commodore diff in my galant, and then there is a better selection of diff ratios around too I'm with lethal get a borgy from a commy/ r31 /falcon cut down then yo...

GC26T wrote:Here's my simple setup-
http://img3.imagebanana.com/view/l2zzo5mh/101_5511a.JPG
2.6, flat tops, M6 head, 15 pound boost, goes great!

that gas "carb" is a impco 300a on a adapter to a EA ford CFI trottle body then custom toob into the turbs

http://img524.imageshack.us/img524/2691/20062009223n.jpg ok, so red is 2 stage ide speed, needed or not? where do i put hose if so? yellow is thermo fan actuator or somethin, not needed green in idle solenoid, needed 12v ignition source blue vacumm advance for dizzy, needed and white, unknown.. any...

I roll on 14 x 7 globes ,biggest permitted by class



but if i went so silly it could easy roll on 18 x 8's

i beleive it was in THAI ?

no mater the language ,mitsy's rule

plug it on,

get it running sweet ,

dyno it,

prolly only need to close up the seconary jet a tiny amount

put a GOOD air filter on it

ENJOY the webber "GROVEL" sound

ok cheeers guys, anyone know wher i can find a diagram of which hoses to and not to use? google hates me cheers the only hose tail of need is the ported vac advance on the throttle body next to the idle jet undo and remove most external stuff ,like throttle nudgers and switches and brackets (like t...

hey guys just seein if a XF falcon's 32/36 weber with adapter plate would work on my saturn engine?? i aquired 2 free so thought id see.. I ran one (34 ADM) Very successfully on my 32 b and it was one of the best improvements i made to the motor as noted above ,i had to make the secondary jet a wee...

Yea well i said that wrong.. LOL But u get my point, U can weld a tank with a soldering iron.. welding v's soldering ,BIG difference And if u had it on ur IGN then wat happends when i crash and the key is still on? its still wired via a tachometric relay ,so that safety is not comprimised if wired ...

It's real easy.. You tap a fitting in a tank for the extra line as they dont make 1 from standed, ........ A LOT bit dangerous ,i hope that is not into the cylinder itself :shock: converters, controlled buy a small box that is wired to your ACC, once the engine is started the coil sends it a pulse ...

yeah cheers bois just dril a hole int the middle of the plug and pull it out the easiest way? nup, tap them in squarely till it moves in a bit then tap in one side carefully 'till it "turns" so you can use some slip jaw pliers to hook on to the now raised edge and pull it out of the block...

Torana68 wrote:.... um , I wouldnt go putting that in a kiln its plastic, not enamled ,some sort of epoxy ,use polyester casting resin and fiberglass pigments.
Roger

second to that, the whole badge will end up a puddle of plastic on the bottom shelf

im running camira inserts and so is cheater?

but i did have to mod my tubes (shorten) or you could wizz up some spacers