Sigma-galant.com

Hi blue thunder

If only the diagram wasn't blurry can you upload a clear diagram?

So fill me in if I were to put a 3.5 Pajer engine what 2wd manual g box would mate up to it? Or is it a custom bell housing

Not much done on this rig in twelve months finished my front brake adapters installed reconditioned fuel tank with new lines nearly done the wiring and that's about it lol

Hi all I'm after wiring diagrams for my lb lancer hatch mainly for the external alternator regulator as I'm changing to an internal reg alternator. Also do these lancers run a dash battery light?

bonnet and valance painted and installed the race seat

Brake upgrade dummy fit up. Machined gn sigma hub outer down to accept r33 discs which have been redrilled to 4 stud. I've made a template to hold the r33 calipers haven't gotten around to fabbing it

Dialed in 4.5° castor and 3.5° neg camber using gn struts, control arms and s13 Cusco camber plates at max castor camber setting. Not a bad start for handling.

Thanks Dave I'm busy putting the rest of the car together next step will be front suspension and

Bit more progress.

I have two lb hatch steering wheels one with the horse on it and the other has the m Mitsubishi symbol. Are these worth anything as I'm not using them and thought someone mightbe chasing one.

I noticed on my racecar I'm doing the body up on it its a lb Lancer hatch which I've put lc guards on it there seams to be a very slight difference in the front section of the guard but I fitted the lb crome bumper on and appears to line up with the side mounts meeting up to the guards ok.

Hi there seeing if anyone wants parts off this really neat one owner sigma wagon just brought in to the wreckers at blacksoil. Its a one owner so neat.

^^ you dont happen to live out past toowomba

Thanks for the advice. I'm still considering using lancer struts as I can make a sleeve that sits between the inner and outer bearing effectively strengthening the stub axle. There no smaller than my ae86 stub axles.

Thanks for the comments I can't wait to go racing either Dave. Ill be doing practice days at willowbank when its finished before entering Morgan park sprints.

Got my s13 Cusco tops today and redrilled struts to suit. Also picked up my r33 calipers

People tell me do commodore front shock inserts fit my lb lancer hatch strutts. i know people upgrade to sigma strutts for bigger brakes and use of commodore shocks. the thing is im going to be running custom brakes for one so sigma strutt not needed and secondly i believe my lancer strutt being 51m...

So just to confirm the gn lower conyrol arms are the dame length as the starions. and also my lb hatch has a 2.6ltr in it and your engine crossmember looks identical to mine in the lb. maybe i have a sigma crossmember in my lancer or they just look similar

note i spent about a month after work till late cutting rust from the body in various areas and replacing with steel and as little bog as possible. all i can say is these mitsubishi's love to rust. the body is in primer now and i have all the bolt on panels left to prep before painting the exterior ...

http://i58.tinypic.com/xaw3ug.jpg got it home and started to strip it down http://i57.tinypic.com/2dlvold.jpg http://i59.tinypic.com/wufdxe.jpg hand chiselled all the sound deadener out http://i59.tinypic.com/dpcnxz.jpg removed driveline and stripped back paint and rust treated all areas http://i60...

Hi all about 12 months ago i was donated this lb lancer hatch from a friends dad who has a long history in building engines and race cars as a business and hobby. the car has had a full engine build using a 2.6ltr engine with a magna high port head and a large cam. im unsure of exact specs but it is...

Ive got a set of 5 13inch cheviots on my lancer id sell. if your keen i can text message you some pics

Yep wasnt intending on using bilsteins as is, my mates dad was the shock doctor in ipswich for a number of yrs so he will re valve them hopefully to suit whatever afco coils i end up getting. think i will stick with my lancer strut setup and convert them to coilover i looked at the stub axle thickne...

Sussed out sigmas at local wreckers gn sigma has 54.5mm strut diameter roughly but didnt like the cast caliper bracket. And the other is a ge sigma with struts that look identical to my lancer struts. not sure i can use any of it maybe the gn lower control arms and bolt a gh lower ball joint to bolt...

Ok so i measured my strut diameter being 51mm, disc diameter is 229mm and brake caliper bracket is detachable. Assuming there lancer struts due to brake disc diameter? only reason im interested is there is two sigmas at local wreckers and i know they will crush them asap so good time to get them if ...

Haha ok might have to suss it out at the wreckers there is two sigmas out there one is twin round headlights the other is rectangle i believe which struts am i after from which model sigma? Cheers.

That would be great cheers, i also went to my local wreckers other day and seen a old four door la lancer rusted out. i took a closer look and noticed it had a old school saas fixed back seat, koni adjustable red shocks in rear and some struts in front with green springs and super thick shock piston...

Ok cool thanks for replys people. If sigma strutts have removable backing plates for calipers my setup must already be sigma strutts as they unbolt also. i noticed its running standard height king springs at the moment and looks to have a bit of positive camber more than i would expect. So how can i...

Hi people ive recently sold my sr20 toyota sprinter street car to focus on my newly aquired lb lancer hatch. it has been built to a point by a good friends dad who has been building engines and race cars for a long time. Its sat unfinished for yrs under a tarp and its now mine to complete and enjoy....