Sigma-galant.com

With your mower, unless it has "Can be used with ethanol fuel" (either on mower or in instruction book) I wouldn't be putting it in it, You know the Australian goverment recomended NOT using any ethanol blend (including E10) in lawn mowers, However some newer models are built to be able to...

Your car is definitly not a GE or GH model, as the body is completely different so being a 84 it's most likely a GJ. You should have a compliance plate on the firewall or in engine bay somewhere that will have model written on it, look for the little shiny plate with year, vin ect on it and you'll k...

Old school tech not good? About all the cars on this site over 20 years old! Least u can work on old school, u ever try working on a new car? Windscreen in me mates car taken em 5 hrs to replace cause they gotta pull whole dash out to do it! Personally I hate new tech, I like something I can rebuild...

When did GK come with 1.6ltr lol

very interesting car, kinda what I'll be doing to my GH soon! love it lol.

welcome to the club!

Hey just wondering if the motor is saying it was made for a BA ute, dosent it then have to meet the emissions of that year? In qld anyway a older motor has to meet regs of year of car, a newer motor has to meet regs of year of motor. Just asking as interested.

sigs are 114.3

welcome to the site!

lol, na just a mate. But my mate who has the GH wagon got pulled up and booked, and have to get new tyres, put air cleaner on, make exhaust stick out further then bodywork on it now lol, already done it all cept the new tyres.

Fanging round town yesterday got pulled up and told there a guy selling a GH down here, went and had a look, fella had 2 GH sedans, one's a SE (i think, the top class GH) model, so buying both of em for $500. 2ltr with 4spd man and 2.6ltr with 5speed man! Gonna pull one for parts and get the other o...

so you running with the doors you got or getting some ge/gh doors? Just interested cause your drawing has the old type doors with full window glass and mirrors off door, which suit the old school look you're going for more I think.

Welcome to the site! sure someone can help you out on here!

huh, rightio, wonder if he just had bad valves but u might be right. I've had 3 x 2ltr GH's and one had reco head, other two original head/valves and I've never used valve saver and never had a prob, but might explain why the GH I just got had one really burnt out valve, although other 7 where all g...

even a V8 is shorter than an inline 6, so yeh a 4cyl prob be easier lol

because sigmas have a jap design engine they dont need valve saver put in them, I've run my 1980 gh for last 5 years on unleaded no prob's. U can put some in every 3rd time you fill the tank if you wish but not needed, instructions on how much to fuel ratio are on the bottles, nearly any servo will ...

lol, bit expensive sounding, see the scorpian drag car lol?

toyota Aristo 2JZGTTE auto RWD? lol. I'm thinking of putting one in mine lol. But have a look at importers around your area, u can get front cuts for $1500+ , see what fits your $$ range and will fit the best first.

Yeh olds, had motor sitting off head lift points for hour and didn't come off, i'm pretty sure the heads warped bad enough to lock head bolts into it, not sure what your talking about with the bolts not corroded, less you mean if head dropped off then i understand. When u said they have torque setti...

Nissan Model / Year /PCD /Offset / Bore 200 Sx /88 to 94 /4x114 /35 to 42 / 66.1 Lexus Model / Year /PCD / Offset/ Bore IS 200 / IS 300 /99> /5x114 /38 to 45 /60.1 LEXUS IS 200 /99> /5X114.3 /38-45 /60.1 NISSAN 200SX S14 5X114.3 NISSAN 200SX S15 5X114.3 nissan 200sx /95- /4x114.3 pcd /40 offset 45 o...

Is it a wagon or sedan mate? Wagon's defintily came with the disk rear end, dunno about sedan sry.

mate, sad to see that! if it wasn't insured and dosen't go on write off register you should fix her back up, I've fixed worse myself lol. If it isn't on w/off reg I'd even be interested in buying it! Good luck with it!

hmm, factory 15's lol. Guess u got the pepperpots? lol. I'm putting 18's in same style as 17's I have for front on back of my GH, so going from 14's up to 18's there's quite a hieght difference lol.

Well, I had 2 running motors, now I have 0! Head on the 2.6ltr I cant even get off, without realising it I undid all the head bolts except the 2 that snapped, then next day pulled the motor with gearbox out of the car.! :o The lifting points are both on the head and it still didn't come apart, didnt...

yeh I've found that even with the 17"s u need to lower the car to get it back down.

not sure if the front ends are different but I've found 17's are as big as I can fit on the front of a GH, there really isn't enough room between springs and wheel arch for more, however this is GH, maybe your's is different. What width is the rim, what offset will make a big difference, lot of 20's...

GJ wagon diff definitly fits GH sedan or wagon, I did one today, full swap.

I'd have to suggest getting a new manifold too, you could retap and helicoil it but they rarely last long, or retap and use a bigger bolt although even that generally is weaker as well, and wreckers rarely want much for sigma gear. Can I ask where about's you are? Someone on here might be able to gi...