Search found 134 matches
- Sun Nov 21, 2010 9:28 am
- Forum: Engine
- Topic: TR11KY going to E85
- Replies: 30
- Views: 24978
Re: TR11KY going to E85
With your mower, unless it has "Can be used with ethanol fuel" (either on mower or in instruction book) I wouldn't be putting it in it, You know the Australian goverment recomended NOT using any ethanol blend (including E10) in lawn mowers, However some newer models are built to be able to...
- Wed Nov 17, 2010 3:22 pm
- Forum: Sigma's Section
- Topic: Ok, has ANYONE done a GJ SE auto to manual???
- Replies: 30
- Views: 3264
Re: Ok, has ANYONE done a GJ SE auto to manual???
Your car is definitly not a GE or GH model, as the body is completely different so being a 84 it's most likely a GJ. You should have a compliance plate on the firewall or in engine bay somewhere that will have model written on it, look for the little shiny plate with year, vin ect on it and you'll k...
- Fri Aug 27, 2010 1:59 am
- Forum: Sigma's Section
- Topic: What way do I go?? I'm lost
- Replies: 28
- Views: 3736
Re: What way do I go?? I'm lost
Old school tech not good? About all the cars on this site over 20 years old! Least u can work on old school, u ever try working on a new car? Windscreen in me mates car taken em 5 hrs to replace cause they gotta pull whole dash out to do it! Personally I hate new tech, I like something I can rebuild...
- Tue Aug 24, 2010 9:07 pm
- Forum: Introduce yourself!
- Topic: new to it all
- Replies: 6
- Views: 861
Re: new to it all
When did GK come with 1.6ltr lol
- Sun Aug 22, 2010 2:14 am
- Forum: Sigma's Section
- Topic: Random Sigma Photos
- Replies: 213
- Views: 564295
Re: Random Sigma Photos
very interesting car, kinda what I'll be doing to my GH soon! love it lol.
- Sun Aug 22, 2010 2:08 am
- Forum: Introduce yourself!
- Topic: Howdy
- Replies: 11
- Views: 1179
Re: Howdy
welcome to the club!
- Mon Aug 16, 2010 8:18 pm
- Forum: Builds
- Topic: GH Sigma EFI 351 V8
- Replies: 278
- Views: 245953
Re: G spec GH
Hey just wondering if the motor is saying it was made for a BA ute, dosent it then have to meet the emissions of that year? In qld anyway a older motor has to meet regs of year of car, a newer motor has to meet regs of year of motor. Just asking as interested.
- Mon Aug 16, 2010 3:50 am
- Forum: Suspension/Brakes/Wheels
- Topic: Wheels - will these fit?
- Replies: 4
- Views: 809
Re: Wheels - will these fit?
sigs are 114.3
- Sun Aug 15, 2010 1:42 pm
- Forum: Introduce yourself!
- Topic: G'day
- Replies: 9
- Views: 995
Re: G'day
welcome to the site!
- Sun Aug 08, 2010 8:44 pm
- Forum: Builds
- Topic: my new sigma build
- Replies: 20
- Views: 3472
Re: my new sigma build
lol, na just a mate. But my mate who has the GH wagon got pulled up and booked, and have to get new tyres, put air cleaner on, make exhaust stick out further then bodywork on it now lol, already done it all cept the new tyres.
- Sun Aug 08, 2010 10:15 am
- Forum: Builds
- Topic: my new sigma build
- Replies: 20
- Views: 3472
Re: my new sigma build
Fanging round town yesterday got pulled up and told there a guy selling a GH down here, went and had a look, fella had 2 GH sedans, one's a SE (i think, the top class GH) model, so buying both of em for $500. 2ltr with 4spd man and 2.6ltr with 5speed man! Gonna pull one for parts and get the other o...
- Fri Aug 06, 2010 12:28 am
- Forum: Builds
- Topic: tubbys GN panel van project
- Replies: 224
- Views: 94810
Re: tubbys GN panel van project
so you running with the doors you got or getting some ge/gh doors? Just interested cause your drawing has the old type doors with full window glass and mirrors off door, which suit the old school look you're going for more I think.
- Fri Aug 06, 2010 12:20 am
- Forum: Introduce yourself!
- Topic: New Member
- Replies: 8
- Views: 1413
Re: New Member
Welcome to the site! sure someone can help you out on here!
- Fri Aug 06, 2010 12:18 am
- Forum: General/Technical Chat
- Topic: Sigma revival
- Replies: 28
- Views: 6679
Re: Sigma revival
huh, rightio, wonder if he just had bad valves but u might be right. I've had 3 x 2ltr GH's and one had reco head, other two original head/valves and I've never used valve saver and never had a prob, but might explain why the GH I just got had one really burnt out valve, although other 7 where all g...
- Thu Aug 05, 2010 9:40 pm
- Forum: Sigma's Section
- Topic: rb25det in a sigma?
- Replies: 20
- Views: 3191
Re: rb25det in a sigma?
even a V8 is shorter than an inline 6, so yeh a 4cyl prob be easier lol
- Thu Aug 05, 2010 9:34 pm
- Forum: General/Technical Chat
- Topic: Sigma revival
- Replies: 28
- Views: 6679
Re: Sigma revival
because sigmas have a jap design engine they dont need valve saver put in them, I've run my 1980 gh for last 5 years on unleaded no prob's. U can put some in every 3rd time you fill the tank if you wish but not needed, instructions on how much to fuel ratio are on the bottles, nearly any servo will ...
- Thu Aug 05, 2010 9:28 pm
- Forum: Lancer's Lair
- Topic: wtf???
- Replies: 6
- Views: 932
Re: wtf???
lol, bit expensive sounding, see the scorpian drag car lol?
- Thu Aug 05, 2010 12:34 pm
- Forum: Sigma's Section
- Topic: rb25det in a sigma?
- Replies: 20
- Views: 3191
Re: rb25det in a sigma?
toyota Aristo 2JZGTTE auto RWD? lol. I'm thinking of putting one in mine lol. But have a look at importers around your area, u can get front cuts for $1500+ , see what fits your $$ range and will fit the best first.
- Wed Aug 04, 2010 11:12 pm
- Forum: General/Technical Chat
- Topic: Discussion topic... Multiple ownership
- Replies: 33
- Views: 4850
- Tue Aug 03, 2010 11:59 pm
- Forum: Builds
- Topic: my new sigma build
- Replies: 20
- Views: 3472
Re: my new sigma build
Yeh olds, had motor sitting off head lift points for hour and didn't come off, i'm pretty sure the heads warped bad enough to lock head bolts into it, not sure what your talking about with the bolts not corroded, less you mean if head dropped off then i understand. When u said they have torque setti...
- Tue Aug 03, 2010 11:21 pm
- Forum: Sigma's Section
- Topic: Fuel warning/empty light stays on
- Replies: 13
- Views: 1775
- Mon Aug 02, 2010 10:00 pm
- Forum: Technical Questions
- Topic: Wheel offset HELP ??
- Replies: 2
- Views: 1204
Re: Wheel offset HELP ??
Nissan Model / Year /PCD /Offset / Bore 200 Sx /88 to 94 /4x114 /35 to 42 / 66.1 Lexus Model / Year /PCD / Offset/ Bore IS 200 / IS 300 /99> /5x114 /38 to 45 /60.1 LEXUS IS 200 /99> /5X114.3 /38-45 /60.1 NISSAN 200SX S14 5X114.3 NISSAN 200SX S15 5X114.3 nissan 200sx /95- /4x114.3 pcd /40 offset 45 o...
- Mon Aug 02, 2010 12:21 am
- Forum: Suspension/Brakes/Wheels
- Topic: 82 se gj rear discs
- Replies: 3
- Views: 977
Re: 82 se gj rear discs
Is it a wagon or sedan mate? Wagon's defintily came with the disk rear end, dunno about sedan sry.
- Sun Aug 01, 2010 12:41 pm
- Forum: Members Rides
- Topic: Limelight GC
- Replies: 23
- Views: 4103
Re: Limelight GC
mate, sad to see that! if it wasn't insured and dosen't go on write off register you should fix her back up, I've fixed worse myself lol. If it isn't on w/off reg I'd even be interested in buying it! Good luck with it!
- Tue Jul 27, 2010 9:29 am
- Forum: Sigma's Section
- Topic: 20's under sigma ???
- Replies: 25
- Views: 3855
Re: 20's under sigma ???
hmm, factory 15's lol. Guess u got the pepperpots? lol. I'm putting 18's in same style as 17's I have for front on back of my GH, so going from 14's up to 18's there's quite a hieght difference lol.
- Tue Jul 27, 2010 1:55 am
- Forum: Builds
- Topic: my new sigma build
- Replies: 20
- Views: 3472
Re: my new sigma build
Well, I had 2 running motors, now I have 0! Head on the 2.6ltr I cant even get off, without realising it I undid all the head bolts except the 2 that snapped, then next day pulled the motor with gearbox out of the car.! :o The lifting points are both on the head and it still didn't come apart, didnt...
- Tue Jul 27, 2010 1:30 am
- Forum: Sigma's Section
- Topic: 20's under sigma ???
- Replies: 25
- Views: 3855
Re: 20's under sigma ???
yeh I've found that even with the 17"s u need to lower the car to get it back down.
- Mon Jul 26, 2010 9:35 pm
- Forum: Sigma's Section
- Topic: 20's under sigma ???
- Replies: 25
- Views: 3855
Re: 20's under sigma ???
not sure if the front ends are different but I've found 17's are as big as I can fit on the front of a GH, there really isn't enough room between springs and wheel arch for more, however this is GH, maybe your's is different. What width is the rim, what offset will make a big difference, lot of 20's...
- Sat Jul 24, 2010 11:55 pm
- Forum: Transmission/Drivetrain
- Topic: diffs
- Replies: 7
- Views: 993
Re: diffs
GJ wagon diff definitly fits GH sedan or wagon, I did one today, full swap.
- Sat Jul 24, 2010 11:46 pm
- Forum: General/Technical Chat
- Topic: Sigma revival
- Replies: 28
- Views: 6679
Re: Sigma revival
I'd have to suggest getting a new manifold too, you could retap and helicoil it but they rarely last long, or retap and use a bigger bolt although even that generally is weaker as well, and wreckers rarely want much for sigma gear. Can I ask where about's you are? Someone on here might be able to gi...