Sigma-galant.com

Note : Reclining seats are not "racing seats" .... and if it's primarily a road car, you will find that competition-type buckets with high sides will become a PITA very quickly to get in & out of !! That's true..i shoulda been more specific....im looking for more lateral support in a ...

Well i'm planning on a GJ wagon....so aslong as a get the glass out of a GE/H wagon....i'm fine...is that right???


It's certainly easier and cheaper than replacing the entire door if thats the case....plus my car stays as one colour lol

Yeah i love that VHT wrinkle finish paint i painted most of the engine bay with it, im talking rocker cover, head, block,sump, water pump, intake manifold, radiator top and cap, battery, overflow bottle, brake master cylinder, brake lines (that one made a bigger difference that i originally intended...

hmmmm

thats interesting...i didnt know the 1/4 mirror panel and glas can be removed/replaced like that



i noticed in ur list of cars, u have a sigma p/van.....is that factory/ is it modded in a particular way?

Hi guys a quick question, i wanna know what is the widest tyres you have fitted onto ur cars...front and rear, and...what size offset is the best offset to use i'm planning on purchasing a new set of rims for my car (getting rid of the old pepperpots) and i wanna stuff as much rubberas i possibly ca...

Yeah the base model Falcon was a 3-speed auto...however, the later models (of the EA) did run a 4-speed auto....all the Fairmonts and Fairlanes ran this 4-speed box. I believe (dont quote me on this) the BTR was used from about the EF or so.. I've only got this info from an automtaic workshop who (u...

yeah not sure what to do with the rear seats yet.....im thinking of mearuring up nimbus or early pajero seat and see with they are moulded differently...i think they have rear head rests from memory too!!!

Hi Torana

A BW41 is simply a 4-speed BW35...they are used in the EA Falcon and i think some later models before they went to the BTR setup

But the 4 gear (O/D) is electronic and needs the computers to control it

Great!!


thanks for the adice...i'm actually gonna check ebay for good 2nd handies on black racing seats.... and maybe just get the rears re-upolstered....i doubt i'll find standard black rear wagon seats lol


thanks again

Hi guys I got a quote from an auto trimmer to re-upholster a set of front starion seats in blak velour and my rear seat in matching fabric.....after i nearly dropped dead after a $2000 quote......i've considered purchasing a brand new set of reclining racing buckets in the likes of SAAS, Recaro, Aut...

Hi guys. another topic from me has anyone else done a custom instrument cluster for there car....moer specifically a sigma. The things i want to look at are the fitment of the guages and more specifically, what did you do regarding the other things like indicator lights, warning lights and accessory...

I rememer having alot of trouble trying to find a colour to suit my wagon (GJ) I used the colour of the interors inside other cars to see if they were a similar colour to mine (i had that tan/cream colour with brown) and eventually chose Daintree green which is on the KJ 2003-2004 Mitsubishi Verada'...

oh sorry...my bad



i was under the impression it was a smaller version of the evo motors


my mistake

This gearbox stick...is the BW 5-speed that has reverse in the upper left hand corner... (you have to push down on the stick to select it) If it is...i have a shortened version which i had done for my last car which i'm willing to part with for a few bucks if you want it. it's in pretty good nick......

Just another option Proton also used Mitsubishi engines and gearboxes. The ones to look at are the Satria GTI hatchback that ran a 1.8L twin cam motor (i believe this is known as a 4G62) and from factory..produced 103kw.....Also the Proton Persona also ran the exact same motor (although these cars a...

why dont we organise a run to clader park??? It's in metro melb, theres a maccas 5 mins away at Talyors lakes, or theres a BP and maccas 5 mins past the track (outbound) and the same on the inbound side of the freeway.....so u can grab ur feed and the 98 octane fuel (assuming u'll run it) for the bu...

Not sure if you know this or not, But i have been told that the valvebody in a BW sigma is infact interchangable with the valvebody with the BW35 Ford automatic...but the BW35 has a more aggressive shift pattern from factory. I've also been told that (assuming ur car runs F/I and runs a computer) th...

sadly no pic of the engine bay But I ran an A1 block and head downdraught weber conversion chrome sports air cleaner OTS Lukey extractors with custom twin exhaust Sigma Turbo rocker cover (the wrinkle finish black version) engine covered in wrinkle finish black With the next project i plan to do all...

Does anybody have any luck with physical searching....in the likes of car/trade shows, race meetings, swap meets (particularly the ones out in the country) or even just speaking to people who have a history of building mitsubihsis/chryslers.......i've found out that no matter how much you know of a ...

What a shame it can't be done to alloy wheels.......

how many sets of 8" pepperpots and PWS wheels would there be?????

Does anyone remember what car was used by the Japanese/Chinese team in Cannonball run (The first one)? Yes the car was a black Subaru Leone. It was (according to the movie) fully computerised with a VHS/TV system, high powered rocket that emerged from the floor of the tailgate, night vision, police...

My personal choice is BF Goodrich. i had these on my pepperpots and were a fabulous tyre! (these were on a GJ wagon) I ran 205/60/R15 (directional) and 235/60/R15 (non directional) on the rear.......i had the rear lowered so the top of the rear tyre slipped under the guard but because of the height ...

well im planning on a GJ wagon so in that case...ur saying i can fit earlier model doors (assuming they are also from a wagon)

Hi guys, Quick question.....Do GE (or early GH) sigma doors (as in the complete unit) bolt on and function correctly as a GJ???? The reason is because i want the side mirrors that are mounted on the door itself....not mounted in the corner of the glass......i want to be able to fit Falcon GT style t...

I destroyed my door skins trying to remove them from the door themselves (ripped all the clips out of the boards) So a mate of mine got some MDF boards (about 3-5mm thick) and used the original Sigma door skins as templates and cut up some new skins with a jigsaw. I wrapped them in brown velour at h...

I really like that black "Lord Vader" look!!!!!!! It looks very smart!!! Is that just vinyl paint u've used on the console and over head pieces??? I actually went to Spotlight, bought 2 metres of brown velour (i originally had the tan coloured vinyl roof) for about $30..and a tin of spray-...

I originally went for a set of OTS Lukey extractors (4-2-1) fitted to a 2 1/4 system.......had a great note...but i went crazy with being unique so i sliced off the last section of the extractors and kept it as a 4-2 setup.....with a 2" pipe running down either side of the car, then bolting on ...

Yeah i've been pondering about this idea too! I think from memory, Super Cheap Auto sells a DIY kit suited for carburettor 4cyl models for about $1000....they were about a 100hp shot. The other thing u can do is ring people like NOS and NX and see what product suits ur needs most, see if they sell d...

as far as manifolds go.....whats the difference.....i thought it was just the fuel pump going from mechanical to electric...which i was going to change anyway


Can't you still port and polish the heat and manifold to suit each other anyway??

Kind regards

Scorpma82

geezer thats pretty much the 'look' im after. They appear to be just a pair of standard Sigma carbies.....are they?? If that's so, i'll simply bolt on a pair of TR/S magna carbies as they identical to the Sigma's with the exception of having bigger venturies. (so i've been told) Are these manifolds ...