Sigma-galant.com

Hi All. The car is Now FOR SALE. I got a Final Edition Lancer Evo and Just don't have Room for both Cars.

Correct. It Is A BW diff. Welded is the reason its......>No good.

Ok. So I need Help. The diff has been pulled apart. (Heavy Shuddering), so I got twisted axles from it being welded and the centre is...Bad...need to sort it. Ideally I would like to put in an LSD Centre and just replace the axles. However finding parts in the south west has been hard. A List off Di...

Nice Work. Did You Change the dash internals so the automatic gear indicator light strip isn't in the centre of the two gauges anymore?

Well...Its been Toooooo Long...I finally decided to Remove the excessive collection of crap that had hidden the scorpion in the shed. Whooooo there is actually a car under all this. Couple of dents and scratched. The paint has Cracked. Some issue with how we painted it in the middle of winter in a c...

Currently I have not made any progress on the Injectors. I have a 2 stage boost Controller that is set to 6 pound and 10 pound and I actually drive her around on the 6 pound more often then not. She runs smooth with no problems on reliability. Putting more boost into her would be just too tempting a...

Shots of the interior...Just slowly getting through it! http://img801.imageshack.us/img801/3016/img2012122100079.jpg http://img846.imageshack.us/img846/9548/20121220200856.jpg http://img209.imageshack.us/img209/4316/20121220201101.jpg http://img208.imageshack.us/img208/7544/img2012122100080.jpg Uplo...

OK So I finally decided to take the Scorpion out of the shed. Gave it a wash and took some photos. It has to go in to get the chairs and interior done soon. I still have a few things to complet before that. Anyway check out the pics. http://img201.imageshack.us/img201/5835/midnytescorpionrear1.jpg h...

The dash was pulled back to steel, then I used the same sound deadner material and built up the lows with layers until I got the shape I wanted. Then I put two complete layers over that. Then I sprayed it with contact adhesive and covered the dash with a good grade vinyl. The vinyl is a little trick...

Its been a while since i have posted. Have go allot of work done and allot of work to do. Here is a photo of the boot install. Alpine amp for the main speakers, Arc Audio amp for the 2 x alpine r type 10 inches in the custom fibre glass box. Completed the install myself. Was not easy and took about ...

Got my steering wheel & boss kit in the mail yesterday. Just had to have a bit of a look....



Cabon Fibre matches the Carbon Bronze Pearl Paint.

Did some sound deadning work on the weekend ready for the sound install. http://img838.imageshack.us/img838/500/sounddeadner1.jpg http://img805.imageshack.us/img805/8534/sounddeadner2.jpg http://img809.imageshack.us/img809/2662/sounddeadner.jpg Pulled tha dash apart ready to Have another attemp... h...

My Brother was the one that put that diff in. It is welded & seems to be holding up alright. In the future I would like to put a geard locker in it. I will do some research and work out what I want to do to the undercarige. At the present it has not really been touched & is in dire need of a...

Did a little work on the weekend. Underbody work. Stonegaaurd & then Sound Deadener. Pics http://img228.imageshack.us/img228/7574/underbodystonegaurd.jpg Stone Guard. http://img708.imageshack.us/img708/3489/underbodydeadener.jpg Sound Deadener. Filed the edge out on the Turbo Vents. http://img23...

Painting is not easy at all...... The colour is "Carbon Bronze Pearl" Body work has to be straight as or it shows. still a long way to go but it is looking sweet. WORK HARD! Here is a pic of the engine bay after I replaced some of the hoses to silicone. This was taken before the paint star...

Hi Guys Its been a while!!! Here are a few Pic of what I have been up to!! first two coats of colour still a long way to go!!! Modified the Bonnet scoop to look a little better. http://img814.imageshack.us/img814/9213/collie2012070900389.jpg http://img69.imageshack.us/img69/1917/carbonbronzepearl.jp...

So I got the Scorpion back today. She went 167.9HP ATW on 10pound boost. A figure I am happy with. The performance shop says that it needs bigger injectors before we go any higher. Sounded sweet. On the way home I realized that she was running sweet and would quite happily take more. Going to have t...

Went to have a look today at the performance shop. He is getting along and told me that it would be completed by Thursday. All that he has left to do is Dyno tune and Exhaust shroud. There are a few other minor little things like put the grill back on and wire in the thermo fan... ETC. He has finish...

Here is the closest thing I could find on the rims... Centerlines is what I was told. Summit Racing and Rockit Industries are great for this sort of thing. Both are favs on my computer. http://www.summitracing.com/search/Department/Wheels-Tires/Section/Wheels/Brand/Center-Line-Wheels/Product-Line/Ce...

Love the look of it in the BLACK. This is like what I want to do. I would like to add some Metalic Blue in the form of Airbrushing. Just the front half of the scorp. Leave the ass end black. The rocker cover looks great polished. I will have to do that to mine. Keep up the good work. Midnyte's Chrys...

Couple of more pics of the progress Intercooler http://img3.imageshack.us/img3/7232/p1000036medium.jpg Interccoler Piping http://img685.imageshack.us/img685/7554/p1000041medium.jpg Drilled and Tapped Vacume Lines. http://img502.imageshack.us/img502/5114/p1000042medium.jpg http://img51.imageshack.us/...

Progress Real SLOW The performance shop had had it for a while.I had started to forget what it looked like. Went and got some photos. So Far they have completed the 3 inch stainless exhaust. Mounted the New Intercooler. Re-newed a couple of the oil lines and Drilled and tapped the manifold so that a...

So the interior was pretty normal when I got it. Need something done to it. At least for a little while till I can afford it to go to the re-upholstery guys. I had a little bit of a play. Happy for now but not as good as I had hoped. It will have to go in to the professionals. http://img688.imagesha...

Yes western Plates Mate. I am actually in the south west.

At the Moment I am unsure of the Power. Its in at the performance center getting some upgrades. I do know that it is extremely fun. engine includes... Please Correct Me if these are not right I am still learning ... Garret turbo t03/4 (Old Typ Oil Only), TR Magna EFI, Stinger EMS. 2.5 Exhaust Water/...

What I did to the rear parcel shelf


Uploaded with ImageShack.us

The Rear Parcel Shelf how i found it.


Uploaded with ImageShack.us

Daylight Shot


Uploaded with ImageShack.us

And this is what I turned it into...


Uploaded with ImageShack.us

So here is the boot how I found it.


Uploaded with ImageShack.us