Sigma-galant.com

I have had Ksport coilovers installed in my AWD Magna for a year or so now, and have thought about seeing whether or not they make one for a Sigma. I contacted them recently and they have informed me they don't but are happy to make some up for me, if i provide a sample for the price of somewhere ar...

What condition is the carb in?

Shouldn't be too hard to find a set. Check eBay

dutzi99 wrote:Can you get lower shocks for an 81 scorpion rather than putting coil overs on???

Yeah mate, not too hard to find either. I got my lowered springs for a GE sigma off eBay

JimmyG wrote:If your going to effort of a coilover rear end you would really need to go a full 5 link rear end. A lot of work involved.

I'm more or less just curious as to what people are running in the rear end, especially the sigma guys.

So all this coilovers talk has got me thinking, what about the rears? All these people going coilovers and I only ever hear about the fronts. Obviously for those with leaf rears it's a bit harder, but Sigma guys what's going on in the rear? Mainly cheater I'm looking good at you, as you also Have a ...

And having answers from superscan and stealth help make my mind up a lot. You guys are a wealth of information, so thanks.

Ok great, thanks guys that clears it up a bit. I'm not looking to work it just yet, but who knows really. Probably best to get it done anyway.

Don't suppose anyone knows of someone in brisbane that does this?

Is it worth doing the relocation of the thermostat on the magna conversion? I see people choose different things and I would really just like to know whether it's worth it or will it cause issues not doing etc etc

Cheers

They're not selling the whole thing complete are they?

Anyone know any decent rust repairers in brisbane? I have a tiny bit that needs doing that's in a shit spot. There's a small hole in the rear windscreen sill on the drivers side. Obviously the screen will have to come out and rear parcel shelf to get it properly. And any ideas on the sort of cost in...

Thanks, that clears it up a bit more. Although the one at the wreckers has a 3 bolt base but it looks more like the 2 bolt one from the back. But I'll go hve another look and look harder

Cheers

Theres a GH sigma at my local wreckers and I've been looking for green struts, or black ones with removable caliper brackets. Its not in a great position so its a bit difficult to work out which one they are especially for how much of a rookie I am. Has someone got some pictures comparing the 2 do I...

So one doesn't need a custom tail shaft?
I am collecting parts for the conversion, and this has been playing on my mind a bit. I got a narrow Jap, with the short extension housing (out of a l200)

best/quickest way to tell which is which??

Luke

Thank you Scorpioncollector, So a Scorpion running gear will be easiest? But an L200 will fit with some other parts....I may have an L200 box as well, not sure of condition, and had totally forgot about it until now. While i've go you here, will the diff from an 1982 scorpion match the GE sigma, muc...

So let me get this right, a wideblock gearbox will fit into the transmission tunnel of a 2.0 auto GE sigma?? It is (obviously) a narrow block engine, so i would need a different engine, but it won't be too wide for the tunnel?? I have a narrow Jap box in the shed, but the extension housing I think i...

scorpioncollector wrote:It's a weather strip to stop water/dirt from being blasted in between the inner guard and the outer guard panel,
it should have rubber mounted on it.

I knew it had a purpose. Lucky i kept them in a somewhat good order. They were pretty rooted.

Shit thing is, I just put it all back together

Over the weekend I will be fitting new springs and shocks to the old girl. I thought, whilst I'm down there I should replace some bushes. I am on the nolathane website trying to work out which ones I should replace, if not all of them? Control arm - lower inner (tapered or straight?) Radius/strut ro...

Sigma had 1600, 1850, 2L and 2.6L. look for a later model as its more likely a 2L or 2.6L and look for the engine number, the one you want is 4g54. If you go for one out of a Magna it is a better motor, will be 2.6L, Most likely fuel injected, but will need a little modification to change it to RWD....

anyone?

Is this the stainless arch moulding as pictured here on my car? If so, no, not important, but I like the look of them. I think they finish the look of the car off, but that's up to who's looking at it I suppose? Dave... I wish mine had those. But nope GEs don't have them, its on the inside of the w...

http://i1300.photobucket.com/albums/ag87/rokinfreekapotamus/20130520_160630_zpsfc253818.jpg Is this an important part of the insides of the guard? I just took them off looking for rust, and found a bit under the drivers side, which is a bit damage because of it. I understand they hold the Mud flaps...

Figured that's what would happen. Hopefully my roommate is home soon and can help push it back....after pulling all the front apart, I really can't be arsed till I've finished what i set out to do lol


cheers mate, you're always so helpful.

Just quickly, I have taken the front bumper off so I can take the fenders off, and on the GE the trans cooler is connected to the bumper. I need to duck for a bit so i need to reverse the car back a bit. with the cooler unhooked will it be fine to reverse back about 10 feet? I'd push it back but its...

a pair of 40 mm IDFs could be made work but you wound need to make a manifold - I dout you could buy one off the shelf there are twin weber manifolds around but for the DCOE models of cause there also could be bonnet clearance issues as well if you are thinking of a 2.6 with a bit more poke as a da...

I'm still working out this whole Carby deal, read a few things and seem to be getting a better understanding, but still a little unsure. At the moment I have a completely stock 2L in my Auto GE. Plans for the future are for a 2.6 (isn't everyone?) I don't necessarily need to be blindingly quick, but...

Not sure where to put this, or if this is well known about, but I happened to stumble across this little beauty. http://mitsubishi.epc-data.com/ It is the catalogue of Mitsubishi parts, there are even links on where to buy OEM parts, I haven't ordered anything myself. This may make finding parts eas...

Love it dude, bonnet looks great!! There isn't enough love for old Mitsus in the drift kids. Scorpions look great skidding. Try and source from Japan a toy of one of the characters of Sapporo, Hokkaido to hang. When my brother had his we started looking for one. But his was run into before we got a ...

77galantv6 wrote:I've got some 13x9's that would suit this pretty well.
Can get them to Port Macquarie to save on postage as well....

13x9?? thats huge, would they fit?