Sigma-galant.com

Which club did you end up going with?
I need to put mine on club reg

Nice... good to see another scorpion in the build.

Sending you a PM

on the GJ Scorps the antennas are grounded on the boot lid.

Ive did the same to one of the GH Scorps ages ago and it worked fine

The grill you have is from an Eterna (import scorpion) which suits the GJ above model scorpions.. but can be used with GH like your pic.

I have a spare grill like that.

All model scorpion guards, bonnet and doors are interchangeable.

Long time Buddy!

Love the work!!

On the carby their is a solenoid which has a wire connected to the ignition or coil. Check that wire or give it a wiggle. Might be the issue

Sigma GJ up and Starion have the same heater core's as Scorpion GJ up Or just get yours reco'd i think its $100.

im in if its for the rear.

HEMI26... .. i aint far from you.. im in viewbank

Your better off using an RX7 S1-3 box, flywheel, clutch then stuffing around with an adapter plate to make the jap box work.

Sorry man might have missed it with all several changes to the website.

No real secret really. Like every engine conversion its custom engine mounts, gearbox etc etc.

Import now FOR SALE http://www.sigma-galant.com/viewtopic.php?f=36&t=4995 Pictures can be viewed below. http://www.reflectivepowdercoat.com.au/import/ Couple of teaser pics http://www.reflectivepowdercoat.com.au/import/2.jpg http://www.reflectivepowdercoat.com.au/import/P1020543.JPG http://www.r...

TUFF Scorpions man!!!!

find another tinter that experienced.

Ive had the rear windows tinted without taking the windows out.. tubby is on the ball... ive seen tinters make the shape from outside the window and use a heat gun to shrink the tint.

Not my collection just pics i have ganked online.

http://www.pbase.com/scorp/scorp_models&page=all

Looks AUS Spec to me.

Its been a while since ive had a Members Section. Will be a good start to motivate me and finish it off. Past Rides GJ Scorpion - 13BT Conversion still in the works. http://www.reflectivepowdercoat.com.au/scorpion/SG/O1.jpg http://www.reflectivepowdercoat.com.au/scorpion/SG/O2.jpg GH Scorpion - 2.6 ...

So did you use GJ mounts?

Do you have bigger pictures? and pics of the arse end?

got some here. they are just pics ive gathered.

http://www.pbase.com/scorp/scorpion&page=all

I have real ones i need to scan still..

Anyone here put on GH Scorpion front and rear bars on a later model scorpion? I wanna make it look more old school with more chrome..

http://www.reflectivepowdercoat.com.au/scorpion/Random/1.jpg http://www.reflectivepowdercoat.com.au/scorpion/Random/2.jpg http://www.reflectivepowdercoat.com.au/scorpion/Random/3.jpg http://www.reflectivepowdercoat.com.au/scorpion/Random/4.jpg http://www.reflectivepowdercoat.com.au/scorpion/Random/...

Right Click Save As for Larger one http://www.reflectivepowdercoat.com.au/ ... orpion.jpg

Have used him heaps of time when i was younger. He recently re did my ROH wheels 16x9's full polish dish and centres.


Coburg Mag Wheel Polishing & Repair Centre
27 Audrey Ave, Coburg, VIC 3058
p: (03) 93544641

OOO i remember this a good 10yrs ago..

Man im getting hyped up now..

piss off the mechanical pump and throw a elec one..

I have a 6 psi elec pump with only 2hrs of use. cost me 80 bucks, you can have it for $40. Piss easy to wire up.

Just picked up 2 imports from the docks. giving them a clean, will have pics up soon.

Im running 16 x 7 all round with 20+ offset

being a 3 peice rim i have got them moded the rears to 16 x 9. I want 8's on the front now, just waiting for another set of wheels so i can pinch parts from it. will get pics of it tonight.

All parts required will need to be from a narrow 4 stud starion. Rears will need the rotor and caliper which is a bolt on. Fronts you will need the full strut assembly and knuckle arm. Springs should be identical as you can use the scorpion top hat on the starion spring. if i reacall the widebody co...

All scorpion guards are interchangeable. Only difference is the indicator location. Even bonnets and doors will work.

Ay man.. good to see flav is working on it.