Sigma-galant.com

I could fit a 1991 4G63 DOHC non turbo to a KM132 of a Lancer LB Hatchback (Celeste) without problems. The only thing that you have to do is to take the flywheel and clutch of a 4G52 (different diameter of the center hole in the flywheel for the input shaft of the gearbox)... other info you can find...

U know what......get some appropriate assembly fluid....and torque the bolts as per the bloody manual lol :stupid: Normally the manual have the values in dry condition, if it should be lubricated it's mentioned. Otherwise here is an interesting read. Just scroll down to the "LUBRICATE OR NOT&q...

yeah, that's one of the common spots, as well as under the chrome strips at the quarter windows. The attachment clips on those rust away and leave holes...

Maybe you could have yours overhauled, and if needed have it re-cored? You could have more waterchannels like that, enlarging the cooling surface like that...

Did that with mine.

I put new carpet in one of the mine a couple of years back. There are a couple of places in Sydney that do new carpets for them. I can't remember the company's name but they were in Lansvale in South west Sydney. Fitted really well and looked nice once done. This one? http://www.sibacarcarpets.com....

Interceptor wrote:I will be important though what they take for shipping.

i guess that will depend on what you will order as the shipping cost also depend on weight...

Just got an answer from their expert: Hello Sven, Thank you for your enquiry via our website chat. We are able to make carpet to suit your car , whether it be Sedan or Hatchback. These are prices for the different types of carpet available Front & Rear : Loop Pile $165.00 Plush Pile $180.00 You ...

Can pick up molded carpets for LA/LB/LC off ebay for 88 bucks. Multiple people contest they fit all lancers LA-C and since the LC only came in hatch my guess would be all are the same? Any change you know of a place not in AU? the shipping is more than the carpet. :( Mine seriously need a new carpe...

Can pick up molded carpets for LA/LB/LC off ebay for 88 bucks. Multiple people contest they fit all lancers LA-C and since the LC only came in hatch my guess would be all are the same? As far as I understood it, the front carpets are more or less the same yes, the difference is more in the rear car...

Nice one Michael! As for carpets: a long time ago I had contact with the guys of the website a bit lower. It sounds interesting as the carpets are moulded but holes are not cut out (for gear lever and stuff). The only thing is that they didn't really answer my question if they also have carpets for ...

Well forums are pretty dead, i know there is a lot of people still reading it, but no one is commenting also no one is really surprised for such a work anymore, because they all think its easy as there are milions of projects all over the net parts, yes, veeery veeery hard, everyday researching and...

Cool! Thanks! I'll pass it on ;)

had a DHLA 40 from an Alfa Romeo on my 4G32. Don't see what people like on them, they just use more fuel and i didn't notice any gains, besides more noise... I just swapped engine to a 4G63 twin Mikuni, sounds way better and more power as well.

damned link doesn't work...

this one:

Hey guys

Someone saw this LC hatchback being posted on the web today. It was taken during the recent Mopar Day in Australia.

Does anyone know anything about it?

I noticed it has 5-lugs wheels front and rear.



Thanks!
Sven

Hi, The stock shocks are normally oil filled ones. You could try to replace the oil but the easier solution is to drain the oil and install strut inserts. I've done that in mine. As far as I can remember Sachs still have them. I'm not sure but the partnumber could be FI110075... Hope this helps... C...

check with Skap, he still might have some for a LB/LC Lancer...

Hey Jason, I've checked the diagram i've put on dropbox but it's all good. I could zoom in pretty good... Did you try downloading it first before you opened it? I can imagine that when you just get a preview that it's quite blurry then...

Hi Jason, This is a schematic of a RHD Celeste. Should be the same as your LB... https://www.dropbox.com/s/agy545nnjbcydgg/RH%20drive%20Celeste%20Schematics.jpg?dl=0 As for the dash light: Our Celeste ST (4g32) has a "charge" light and our GT/GSR (4g52) doesn't have a light but they have t...

Great to hear Taz!

Strange how someone on the other side of the world can give you a solution which is that close to you when you think about it... :p

from an old (2010) post in the Yahoo "Old_Mitsubishi_cars"-group I got this about Mikuni secondary diaphrams: "Guys, These cant be found, the people below have a modified housing and new diaphram, cost about $75 plus postage and a $30 refundable deposit on the housing http://www.advan...

The stock Mitsu-partnumber is MD005480. This one has been replaced by MD092660. These are used in all Mitsubishi engines (4G3 - 4G5 - 4G6...)

i understand the confusion, they all look the same and the difference in angle is rather small.

When you are lucky you have on the inner side of the fender a marking where they should come...

Still great find Cottees!

Cottees wrote:Hmm.. I may be interested in those door cards. The mirrors I got set from the US. They came off a GTO from what I can tell.

Might be the wrong slant angle then Cottees: I think Galant, Galant GTO Lancer and maybe also FTO used a 60° angle. Celeste should have 45°...

Hey Mark!

Nice collection you had!

ik stuur je in pv een emailadres door van 2 broers die een paar galant sigmas hebben en ook wel wat onderdelen. Ik heb er met hen over gebabbeld en ik mocht het doorgeven aan jou

Pictures are obligatory over here :p

Greetz
Sven

Sweet!
I thought i had a nice one, but compared to yours i still have a lot of work on mine :s

I can add this: - Site name: BlueThunder - Location: Europe - Belgium - Car details: 1978 Celeste (LB-lancer hatch) converted from 1600ST to 2000GSR with 4G63 twin carb, intention is to make it a complete stock GSR with 4G63 twin carb - Link to photos: http://www.flickr.com/photos/blue_thunderke Gr...

I had the twin carb version of this engine in my Celeste (originally from 1982 Saporro GSR) I think you are wrong Cottees: it's not "Ignition" but "Injection". Ignition still works with the distributor and big coil pack iso electronically controlled coil packs. On the other hand ...

From your description I would say it's a 4G63 SOHC (8 valve) engine. Found in Lancer Turbo, Starion and Saporro Turbo/Scorpion. ECI stands for Electronically Controlled Injection.

PS, your link doesn't work...