Sigma-galant.com

No worrys mate I'll msg u when I get them.

Ok I rang microtech and they said the ecu is configured to run all tr magna sensors and the ecu will pick up the 2volts from the dizzy. Also they are sending a wire diagram for all the magna parts. All I need now is a Wideband sensor and gauge.

My car is a sigma 4g54 tr magna efi head and shit. Just received my microtech lt10 ecu today I can figure out most of the wiring but if someone's Already got there's wired and running it will be alot easier for me. Just need to no what pins/color wires from the dizzy I have to connect to microtech. ...

Never seen a car run hotter without one. Anythings possible I suppose

I did this today. Brought a 14 inch radaitor electric fan. And a Davies Craig thermo switch which is adjustable from 60-100 deg. Cost 50 bucks from repco. I had to order one in took about a week to get.Comes with easy wiring instructions. I put my thermo probe in top radiator hose. Also make sure u ...

Where abouts in Sydney are u?

What do u need done? Good one in Sutherland shire

Hey mate I'm in Sydney. Don't really no much about those diffs. Your probably asking alot more then I wana spend lol. The work shop next to me has done alot of my welding he said he would weld the brackets for couple cases of beer. That's why I didn't want to get a shortened one cos of cost. I love ...

I'm starting to get sick of my 2.6 so I'm dropping in a 4g63. I have everything sorter with that which brings me to put a stronger diff in. I no people put scorp LSD in but I'm looking at hilux or vl LSD in. My question is which is the best to put in without shortening them. Does anyone have the len...

One big fan is better then 2 smaller fans that's what I was told from radiator shop when I was looking for my car. Thats if your radiator is square like mine. Get a 16 inch fan. And run it on a adjustable thermo switch.

I put it like the picture. Didn't run the best when it started but I earthed te timing connector and set it to 5 btdc. The very small miss at idle went away. But it's seem a bit gutless when I drive it and seems to rev high faster but the car goes no where. Then I retard the timing to 13 btdc with t...

Hey rob I was wondering how u went with your timing cos Mine rotor is on tooth the other way. I put I timing light on it and it runs and idles good at 23 btdc. And I think my dizzy is out too. Let me no it u got yours to line up with the dizzy timing mark and is running. Many mines running on 3rd cy...

I've got one from a gh. If your interested. It's not a mesh one tho. In Sydney.

Not to worried about the money cos I'll do the cutting and welding. I'm looking at pushing though about 16pound. I haven't seen it done to a sigma before. Am I just wasting my time trying to get 1-2 kw or will it be a decent gain like 10+ kw. Thanks for your feed back.

I was thinking really short runners about 1-2 inch long, like this pic http://www.google.com.au/m/search?site= ... unners#i=3

Just wondering does anyone have short intake runners on there engines? I'm looking at moding mine to short and fat intake runners but is it really worth it?

I've done two efi setups one a tr and other tp. From both I'm getting a very very small miss at idle when hot. Revs about 800. Miss goes away as soon as I drive. When cold it doesn't have a miss until get it's to about 1100. The missfire are about 2 to 3 seconds apart. I've replaced leads and plugs ...

Does anyone have a efi tp auto wiring diagram? Pictures would be so much help. Cheers

just rang one of the adaptronic dealers and they said 2800-3200 for full install and tune. the cheapest i got so far was eculink g4 extreme ecu one of the dealers near me said 2200 full install and tune. ill just have to start saving more money never stops if u own a sigma lol. thanks for the help b...

Astron 2 m7 head. If your even down in Sydney I'll show u how I've set mine up I've done 2 now tr and a tn setup. Both easy if everything comes out of a running car. I would spend the extra money to get a running car so u don't have the headache wondering wats not working. If u need any help let me ...

Just did my mates set up week ago. We got the magna for 250. Head shaved and valves reseated 200. Vrs kit 80. Bocsh fuel pump 80. Intake manifold cut and welded 100. And little other things like fittings and hoses 50 and balance shaft eliminator kit 40. So all up another 800. Very cheap . Add anothe...

They have a kit for them on eBay under sigma hid

That's for the advice mate I'll put bigger injectors in and a wideband sensor in to see how it goes. I've seen some guy on a magna putting 4 more injectors into the plenum champer running a piggyback ecu to run them when it hits boost. I've been ringing alot of tuning places they all say go with sta...

Cheers boys I'll go with the 2 1/2 all the way through

Just wondering what size exhaust should I do for a mate 2.6 na. 2 1/4 or 2 1/2 For best performance?

Yea it's got the stock ecu. I've been quoted about 4000 for a after market computer and tune, don't really have that kinda of money atm. But if I can get a blow though set up for less then 1000 that's more in my price range.

im run a turbo tr efi setup atm it leans out all the time so i want to swap it to carby. 1st question wat is a good carby to use for blowthough setup. i read ppl use 32/34 webers but the might leak under boost and i dont really wana put it in a pressureised box. 2nd question can i use a 2.0 turbo di...

Just saw that car at summernatz best Sigma I've ever seen. Show car.

I have a stadium thunder with a 7 turn electric motor. Very fast, jumps the width of a netball court. Stopped racing it cos it kept melting batteries started to cost to much to run. And I use to have a mini coope 30 cm in length 4wd belt driven 2 speed size 15 motor about 2.5 hp I think. Top speed j...

Did u change the pully over to the new motor. Models with powerstering have 3 grooves for belts and the non powersteering only had 2 grooves.