Sigma-galant.com

I mounted 2 fuel pumps for it today. Just using a lift pump and a vl commodore high pressure pump . I removed the inner gaurd panel near the fuel filler and bolted them to it. Close to the factory lines and is protected from dirt and rocks ect. Will post pics soon

and as it turns out im shit with this posting pictures thing sorry

https://ibb.co/cPxE6d
https://ibb.co/eJ4SRd
https://ibb.co/bQh8XJ
https://ibb.co/g9joXJ
https://ibb.co/isfCsJ
https://ibb.co/cuoyXJ
https://ibb.co/iYBP6d
https://ibb.co/bEmfey
https://ibb.co/dO1Dzy

<a href="https://ibb.co/cPxE6d"><img src="https://thumb.ibb.co/cPxE6d/20170613_132029.jpg" alt="20170613_132029" border="0"></a> <a href="https://ibb.co/eJ4SRd"><img src="https://thumb.ibb.co/eJ4SRd/20170911_163557.jpg" alt="20170911_1...

so iv been gathering bits to efi and turbo my l200 ute, (thought id put up a build post) its a budget build, its got a 4g63 carby, the carby has seen better days, I had most of the bits sitting around to do the conversion just need a few bits extra, im just bolting all the starion gear onto the ute ...

so I have a gd wagon that has a 4g54 and efi, its currently getting an adaptronic and turbo added to it, I have run into a problem with the wastegate,(its a factory sigma turbo manifold and gate) when bolted together there is a gap in the gate plunger and its sea, would only be a couple of mm, im wo...

Ok sweet as mate. Have you got any pictures of them or a link mate. What was it all worth. Cheers

Oh yerp cheers mate thats some good info. Iv got the std tn/tp ones in it atm do have a set of tr/ts blue tops. Also have a set out of a 4g61t import engine that are a 390cc. Was thinking them with a rising rate reg would work nice. Did see a set of rx7 550cc for sale. Could allways buy them and run...

so im building a 4g54, its got fuel injection from a tn magna, got an adaptronic e420c ecu, siggy turbo manifold and gate, t4 and a big cooler, so im sorting out the fuel system and im thinking about running a rissing rate fuel reg, iv been looking for the adaptors and cant seem to find one that wou...

Astron 2 bottom end with std pistons and crank

Just wondering if anyone can tell me how much i can take off a magna head to gain a compression ratio up around 11 to 1 mark

iv got a gh jap 5 speed behind a starion 4g63t never had any problems with it, starion has a hyd clutch so there might be more involved in setting up in a galant

would love one of them manifolds, do there rare in NZ are they

what cars come with the twin carby manifolds ? im keen as for one

I have a l200 with flat tray, with a 4g63 from a starion in it with mpi big front mount and all the other bits to go with nice little ute

I have a narrow 5 speed here that has a larger input shaft than the others I have, I found this out the hard way, I got a engine box combo, but the box in my car was good so I just put the engine in, when I went to drive I had nothing, as the clutch on the engine was big shaft and the gearbox was li...

my galant one is a cut and shut job to make it longer as, the bracket was put on the wrong side for some reason, It was modded for rwd when I got it, but the one in my l200 is a magna one I think

the calipers in the ebay pic are the same ones that I have here mate that ur interested in, that I was ment to fingd and send you pics have been flat out sorry will get on to that

yer I might keep en eye out for a 3d, I have a 3dv4+ in my starion powered l200 its got mpi and all the other shit that goes with lol

yer ok, there is a wolf 2d for sale atm, I was thinkin about getting its cheap and I like wolfs, I did have the thought about running that, as its only a fuel ecu, I had the thought of the dizzy from a 2.6 that have vac advance, rip that diaphragm off and put a turbo one on it that I have here so it...

so Im in the works with my wagon, adding a turbo( to a efi 2.6 ) just woundering if the standard ecu will keep up with the turbo, I will only be running low boost, I do have a rising rate fuel reg here for it, the turbo im using is a std vl turbo, as I had one sitting there, ill be using an intercoo...

got good oil in it mate and do regular changes ?, I know my 4g54 gets a bit loud when its due or over due for a service lol

we build every thing with beer lol

Pete man you is on here now, he swaped me a 4g61t for the gd in this post http://www.sigma-galant.com/viewtopic.p ... sie#p42748

what was the cam specs of the 2 cams mate ? im pretty keen on them and have you any vids of your car with the new cam

Thank you very much mate you have helped me out heaps cheers for the pics

mate thank you very much, you have helped me alot, so thats bolted through the chasise rail, are there holes there or will i need to drill them cheers mate

iv just found out that im down a car to tow a traylor to move house next week so I need to fit my toybar to my gd wagon, the one I have is off a vp commodore, im goin to cut it down to fit, I just need to see how others are fitted, do I need to remove the fuel tank the bolt the bar to the floor ? Im...

you will want a rwd water pump, rwd engine mounts, inlet manifold will have to be cut and shut, wiring cut and shut to suit, direction, and theres the cas , belt the fire wall in or relocate it, im doin this conversion to my gd sedan

im keen on the gc front for mine i think, i like the clean look of the grill, im easy on the rear realy i think they both look good, when i was a kid the old man had a gc wagon and he cut the grill out and fitted 2 extra lights to it, but used the gd light if ya know what ya mean, looked realy good,...