the engine stutters and the tacho jumps. probably half a second.
it only happens when the electrical system has warmed up. Im going to try disconnecting the tacho tonight, then i will swwap the ignition box, then i will try a non resistor type coil.
Search found 1553 matches
- Fri Sep 26, 2014 5:47 pm
- Forum: Electrical/Audio
- Topic: help. ignition problem
- Replies: 3
- Views: 3398
- Thu Sep 25, 2014 9:15 pm
- Forum: Electrical/Audio
- Topic: help. ignition problem
- Replies: 3
- Views: 3398
help. ignition problem
It's been a while folks. I need your help! I have a 4G32 and the dizzy has Sigma electronic guts with a Sigma module. My issue is that when I am accelerating, when I reach 4000rpm the tacho launches to 8000 rpm for a second and the engine jumps a little. The hotter the day the worse it is and doesn'...
- Sat Apr 12, 2014 8:03 pm
- Forum: Electrical/Audio
- Topic: Electrics - Indicator modification..
- Replies: 1
- Views: 1429
Electrics - Indicator modification..
Here is one for the electrical savvy guys. I wish to change my lights setup for indicators. And please dont lecture on the legalities - i dont care. I want to wire up my indicators with my park lights so that: a) when my park lights are on, all my indicators are on; and, b) when i indicate, all the ...
- Sat Mar 15, 2014 3:38 am
- Forum: Builds
- Topic: EOI: 1976 GD Galant A57 Sports Pack. WA
- Replies: 203
- Views: 41477
Re: EOI: 1976 GD Galant A57 Sports Pack. WA
Anyone that watched this thread knows that there is about 1000 man hours, $20-25 grand and a whole lot of love in this car. Im looking at moving her on. What is she truly worth? Nothing on the car hasnt been replaced unless it was schmick, like the interior.. Custom wireless covert stereo system. Mo...
- Sat Dec 21, 2013 3:53 am
- Forum: Sigma's Section
- Topic: solex to 600 holley
- Replies: 18
- Views: 3024
Re: solex to 600 holley
i have a 32/36 weber to holley 4bbl adapter plate if you need it
- Thu Dec 19, 2013 11:12 am
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: GC Coupe resurrection
I have a set of turbos with 50mm pirellis on them so going to run those. They need a clean up though!
- Wed Dec 18, 2013 10:05 pm
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: GC Coupe resurrection
Getting there
![Image](http://imageshack.com/a/img197/2672/gncq.jpg)
![Image](http://imageshack.us/a/img268/5535/6mx7.jpg)
![Image](http://imageshack.us/a/img809/1996/79ur.jpg)
![Image](http://imageshack.us/a/img600/4639/exld.jpg)
![Image](http://imageshack.com/a/img197/2672/gncq.jpg)
![Image](http://imageshack.us/a/img268/5535/6mx7.jpg)
![Image](http://imageshack.us/a/img809/1996/79ur.jpg)
![Image](http://imageshack.us/a/img600/4639/exld.jpg)
- Tue Nov 19, 2013 1:29 am
- Forum: Engine
- Topic: Redline manifolds
- Replies: 3
- Views: 1444
Re: Redline manifolds
That port is only to heat the carb. You can get block off bungs. I have one
- Tue Nov 19, 2013 1:26 am
- Forum: Galant's Garage
- Topic: GC carpet
- Replies: 12
- Views: 1918
Re: GC carpet
Knox is ok. They make them oversize so you have to trim them. But make sure you tell them to make the firewall end 15cm longer so it goes all the way up. I conplained about that
- Mon Nov 18, 2013 2:53 am
- Forum: Galant's Garage
- Topic: GC front end
- Replies: 13
- Views: 2202
Re: GC front end
just get a soldering iron and some plastic that feels the same, and litteraly just melt the crack line and melt a bit of extra plastic in there. very, very easy. I used an oxy welder to heat up a screwdriver and just use that the first time. You need a GC center grille badge PM me i will send one yo...
- Mon Nov 18, 2013 1:48 am
- Forum: Engine
- Topic: 4g32 serpentine belt conversion kit
- Replies: 1
- Views: 1050
4g32 serpentine belt conversion kit
So now I have the 85a magna alternator, but now the belt squeal is really getting to me and the belt is wearing out quick. I'm going to look into getting a set of pulleys made up to suit (crank & water pump). For serpentine belt. Who would be Keen to buy a set? Obviously will be cheaper if there...
- Sun Nov 17, 2013 8:52 pm
- Forum: General/Technical Chat
- Topic: REVS
- Replies: 11
- Views: 1716
Re: REVS
He is talking about tacho not actual revs I think?
Just sounds like a loose wire
Check the wires on the negative side of the coil and fiddle with the wires up behind the dash.
Also just try tapping it while engine on to see if it's stuck
Just sounds like a loose wire
Check the wires on the negative side of the coil and fiddle with the wires up behind the dash.
Also just try tapping it while engine on to see if it's stuck
- Wed Nov 13, 2013 9:19 pm
- Forum: Engine
- Topic: 4g32 wrong head?
- Replies: 11
- Views: 4408
Re: 4g32 wrong head?
It's just weird how I filled them with solvent and poked with a screwdriver and they didn't drain. Possible that they used the same cast but didn't drill them out?
- Wed Nov 13, 2013 9:14 pm
- Forum: Engine
- Topic: 4g32 wrong head?
- Replies: 11
- Views: 4408
Re: 4g32 wrong head?
Yeh the ebay old stock ones that were up. I just want someone to tell me if these galleys actually go anywhere or not lol Here is belt drive gasket. Seems legit. What are those though. Were they oil or water? http://i.ebayimg.com/00/s/NDMzWDEwMjQ=/z/mq0AAOxy-sRSW56R/$(KGrHqZ,!k4FE(7Sl3zlBSW56RWfyQ~~...
- Wed Nov 13, 2013 5:05 pm
- Forum: Engine
- Topic: 4g32 wrong head?
- Replies: 11
- Views: 4408
Re: 4g32 wrong head?
Talking about the 3 holes on the deck of the block along the intake side that protrude down the side of the block
- Wed Nov 13, 2013 2:45 pm
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: GC Coupe resurrection
http://imageshack.us/a/img5/6114/kld2.jpg http://imageshack.us/a/img513/5961/d4ws.jpg Make it easy to get to the pipes this time http://imageshack.us/a/img12/5167/yfzt.jpg http://imageshack.us/a/img401/9808/y5ht.jpg No need to comment on the two different colors. Budget build=using what I have http...
- Wed Nov 13, 2013 2:34 pm
- Forum: Engine
- Topic: 4g32 wrong head?
- Replies: 11
- Views: 4408
4g32 wrong head?
Need some advice re my new 4g32 Its fresh, only 0.025 os and came with a sexy stand But I feel the head is wrong. There are these galleys that aren't covered? I filled them with some solvent and jammed a screwdriver in each one but they seemed to go nowhere, but I'm scared they are just blocked. Any...
- Wed Nov 13, 2013 1:42 pm
- Forum: Suspension/Brakes/Wheels
- Topic: GA brake trouble
- Replies: 16
- Views: 3385
Re: GA brake trouble
that setup is ridiculous
get rid of the booster all together!
get rid of the booster all together!
- Wed Nov 13, 2013 6:52 am
- Forum: Transmission/Drivetrain
- Topic: Shift kit for jap 5 speed?
- Replies: 10
- Views: 2873
Re: Shift kit for jap 5 speed?
i have one of those in my wagon
amazing
amazing
- Wed Nov 13, 2013 6:50 am
- Forum: Suspension/Brakes/Wheels
- Topic: GA brake trouble
- Replies: 16
- Views: 3385
Re: GA brake trouble
they are completely different ratios
I had this problem, it was that the master wasnt retracting all the way to allow the piston to open up the return valve. I put a washer between the master and the booster on both bolts and all sweet now
I had this problem, it was that the master wasnt retracting all the way to allow the piston to open up the return valve. I put a washer between the master and the booster on both bolts and all sweet now
- Thu Nov 07, 2013 3:55 pm
- Forum: Galant's Garage
- Topic: GA interior heater radiator valve repair?
- Replies: 11
- Views: 3102
Re: GA interior heater radiator valve repair?
Post a photo.
I used a XY Falcon tap from rare spares in my GD. Perfect match
I used a XY Falcon tap from rare spares in my GD. Perfect match
- Thu Nov 07, 2013 11:28 am
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: GC Coupe resurrection
The frames yes. And the door arch
- Wed Nov 06, 2013 10:27 pm
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
- Tue Nov 05, 2013 11:18 am
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: GC Coupe resurrection
I'm going to do the boot lid, inside lip of the guards and the inside of the door frames too. Because my paint is going to look so 'shitty' I want a strong contrast when things are opened.
- Tue Nov 05, 2013 1:11 am
- Forum: Engine
- Topic: 4g32 turbo queries
- Replies: 1
- Views: 1216
- Mon Nov 04, 2013 10:01 pm
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: 2 years later its happening.
Just peeled the 25m of masking tape off
![Image](http://imageshack.us/a/img513/2741/v8ag.jpg)
![Image](http://imageshack.us/a/img513/2741/v8ag.jpg)
- Mon Nov 04, 2013 9:41 pm
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: 2 years later its happening.
Someone used brush on underbody under the hood. Rank stuff. Turps and rag it off. http://imageshack.us/a/img5/7599/sb11.jpg http://imageshack.us/a/img713/2346/w3ro.jpg This is the plan http://imageshack.us/a/img716/9056/4gct.jpg Started today http://imageshack.us/a/img163/4993/pvzs.jpg Out of light
- Sun Nov 03, 2013 3:10 am
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: 2 years later its happening.
You Mean like grinded metal?
- Sun Nov 03, 2013 3:01 am
- Forum: Panel/Paint Shop
- Topic: Help - Durable paint options
- Replies: 12
- Views: 4809
Re: Help - Durable paint options
Sanded back my boot lid today that was green metalic and clear coat, but didn't sand all the way back, just roughed it up, reckon should be okay? Primer seemed to stick
- Sat Nov 02, 2013 10:01 pm
- Forum: Builds
- Topic: GC Coupe resurrection
- Replies: 26
- Views: 17232
Re: 2 years later its happening.
Thinking maybe after I apply the rust paint to the Bonnet I might look at keeping the Centre risen bit bare metal laquered or a cold gal or hammered finish. Unsure