Sigma-galant.com

Will that diff fit into a sigma? If so where do I buy one?

I know this is an old thread but would anyone know where I could buy one of these LSD options?

Needing one now.

Thank you.
Centre only.

Ok, long story, I changed the rockers on my 4G52 motor, motor is in good condition. Put is all back together did not work so went back to old rockers, The car started, ran but very noisy. Chain noise. Oil pressure light did not go out, only ran about 5 seconds. Still no oil preassure. I took out the...

I am looking for a drilled cam gear for a 4g52 chain drive.

I see these are an old post but are they still available?

Sorted

Looking for a starter motow for a 4g52 narrow block manual.

I see there are 2 starters available. 8 tooth and 9 tooth.

is there a simple way to know? Number of teeth on flywheel? Ect ect.

I will buy new but just need to know what one to buy.

Thanks

http://i106.photobucket.com/albums/m267/rex323/imagejpg2.jpg http://i106.photobucket.com/albums/m267/rex323/imagejpg3.jpg http://i106.photobucket.com/albums/m267/rex323/imagejpg4.jpg http://i106.photobucket.com/albums/m267/rex323/imagejpg1-1.jpg I hope that helps. I bought the sleeve kits from a pl...

I just thought I would throw up a photo's of mine I made today.

Yes, just the inside.
Thank you all.
Looks to be sorted

Thanks for looking

http://s106.photobucket.com/user/rex323/library/Lancer I just put bigger struts in the lancer I went to buy brake parts but were told these are not sigma. So looking at the Bendix book it looks like they are scorpion. Problem is if they are scorpion Repco said the pads are no longer available. DB297.

I am going through this conversion now. The arms are about 4cm conger. Change the inner bushes with the new super pro ones but leave the centre steel sleeve out. Then the lancer pins fit. I am using sigma struts so I am keeping the sigma steering arms on. But I have a question, the sigma steering ar...

That is ridicules, 30 minutes from asking the question, I have been down to the shed. Found the tensioner, backed it off. Pulled the cam out. Put the new one in with the right grease. Everything is back in but just finger tight until the morning when I nip it all up and set the rockers. That would b...

Hi,
I am wanting to change a cam on a 4g52.

How do you back off the chain tensioner?

Any help would be good.

This is not a cruise but a fun run family day.

https://www.facebook.com/groups/4638569 ... 043703296/

The details are all on the Facebook page.

Hi, going to make a dipstick so need some other measurements.

i see it is 220 mm long what is the full and empty markings from the bottom?

Thanks

http://issuu.com/repco/docs/radiator_gu ... ipBtn=true

Repco Radiator catalogue

HZ Just needed to cut out for the horn mounts and need to get the filler cap moved.

I just bought a new boss kit for the lancer.

Paid $40 for it.

He has heaps of them. Place is Phills rotary at Lawnton. He also sells new strut tops for the lancer.

He has an eBay shop but not all parts are listed.

07. 32054433

Don't know what the lancer gets but it is much better than my last car. 35ltr to 100klm.
13b monster port on 4.9:1 diff.only driven on weekends.

I can do a day run in the lancer on one tank it took 3 to 4 tanks in the 323.

I can't see the link for the alternator conversion.

I need this link ASAP. I am putting the sigma alt in the lancer on the weekend.

The new alt has the one main wire and one small wire.

The car has the external reg.

I have seen the link before but now can't find I.

Help please.

Thanks.

So what car do I get a narrow 5speed to go into the lancer ?

Thanks again

Yes it was serious question.

Every where I looked had different options and refufered to cars of different varieties , different tail shafts. Different sigmas . I would not know one sigma from another. I am new to Lancers.

Thanks for the link.

May just keep the 4speed. Saves the brain cells.

Can someone please give me a simple answer to my question.

I just bought a 4G52 2.0ltr how do I know if it is a wide block?

Remember simple answer.

Many thanks.

Can i have some of your negitive camber. i only have positive.

i am interisted in some sigma lower control arms if some one hes them

That would be the one.

It was an ex Kahanacross car.

http://s106.photobucket.com/albums/m267/rex323/tra/

That may just be who told me.

I will give him a call. Unless you are reading this Steve.

Hi, I have been told the Sigma control ares fit the LA lancer??

I have an LA lancer rally car. It has bigger struts in the front so it sits front up.

Porblem is i now have positive camber. I have seen people cut and lengthen lower arms. I would prefer not to.

any help.