Sigma-galant.com

Yeah, negative offset means the wheel moves away from the car
I'd like around $450 with the tyres..

I have a guard roller if your in Melbourne..
I run 13x7 0 offset wheels on my coupe


it is only the standard lancer diff though

See if you can find a 32 efi set up off an ex lancer, they ran a 32 turbo with Centre point injection..
Try trademe

I'll be selling some 13x7 roughly 0 offset polished jelly beans.. They look sweet on my lancer but I did roll my guards. It also sits about 4 inches let than stock

As far as I know the red ones are the normal ones, I have never seen a green one in ozz.
Could be mistaken though..

Easy tiger.. it's just tech screwed in for placement. I'll fit grommets around the hoses and a foam square under the pump and bolt it in.
There isn't much room under there with 3" lowered suspension, and well.. I wanted the pump in the boot.

A little more progress.. got my suspension sorted, will hopefully fit it tonight if I get time.

Also have 3" blocks to fit to the rear then have to check clearances and work out what else will need to be done

Nah, got it sorted thanks!

Is the choke system working properly?
Can you do a compression test?
Bad fuel?

I bought a set of these rubbers too, mine are also too long, as long as he can have them back to me in 2 or so weeks I can send mine to him, I have also been in contact with him to find out what the go is..

Thanks for the advice guys.. I already have a plan to minimize the pump vibration, I'll have to fit a filter before the pump, I have the one that came with pump somewhere.. Also just fitted a coolant bleeder, I figured there would have to be air getting trapped in the hight point of the hose http://...

Yeah, I have the grommets at home already.. The boot is sealed off only by the seat and wooden panel, both which burn quite easily..
Will fit a metal sheet when time permits.

But cheers!

Finally got around to putting the fuel pump in the boot, now I just have to put a cage around it and it passes roady apparently..

They are the ones I got.. Cheers!
I haven't fitted them yet..

I can't find a link on eBay to give you sorry, I just searched for universal strut or camber tops..

Ah..!
I mean assemble in half a day, assuming everything is ready to go.. Just to clarify

You can build a 4g32 in a half a day easily!
Get all the prep/machine work done first, grab a beer and your motor is done before the beer is!

Thanks Dave, my mate makes CAMS approvable cages so he will take care of that side of things. As for rego I'm still not sure which way to go, I might just get full rego before I start any major mods

Il be getting a cage made for my 2 door soon if that will be of any help?

What does it do when it warms up?

ignition leads maybe? if it has been sitting i always change the cheap basics first, plugs, leads, points, condenser, rotor button and dizzy cap.. as stated above check vac lines and inlet gasket.. also.. carb might be overfueling? how old is the fuel? does it rev up if you accelerate? any smoke out...

Alright.. Dash is back in, all lights and tacho working finally

Alright, all the lights are working, engine is tuned pretty well but I haven't driven it yet so I'll give it a final tune once I get the new exhaust on..
Gotta do the suspension, fit all the new bushes and move the fuel pump into the boot then it's ready for the cage

Nope, she's a keeper.
Debating putting an s13 front end in.. Still undecided.

Got it all back together finally!
Still got a bit to do, but I'm getting there.. Slowly

I might have a couple laying around if your plays up

I just got universal ones off eBay, they were $100.. The k-Mac ones were $600 ha ha

Thanks!
So, it's up and running.. Needs some tuning and also gotta fix a coolant leak then the engine side of things should be done.

Can someone please post me an la lancer wiring diagram?
Or a link to one if it's already on here.. I had a look but couldn't find one
Cheers.. Nathan

I balanced them, but not tuned at all cause I couldn't get it to idle, all good now though. Will do some fine tuning soon and take it for a spin!