Sigma-galant.com

post some pics of the carb manifold and engine bay

I would but ive got the rx7 and the gsxr 1000 registed even that's getting expensive club rego would be good

75glnt wrote:Welcome back mate!

Old girl still on its previous condition?

thanks guys yeah she still all good shes in the garage with a car cover on it shes been in there for about 3years I get it out once every 2months drive it around the block so all good thinking of getting it reregested

hey guys its been awhile good to see so many galants and sigmas still geting around and a lot of new members so whens the next cruise ive still got my old girl shes been packed away in the garage for agers but im thinking of getting her reregisted sick of driven rotarys looking ford to getting back ...

i bought my linkages and filters from here there got some good stuff http://www.lynxcorp.com.au/main.php?idx=home

hey guy havent been on here for agers any way just wanted to know will gc,gd door rubbers fit gb doors or the different thanx...

yeah ive still got her doen bits here and there dont drive her all that much to busy riden the gsxr 1000

you were better of useing a starion dizzy thats what in running on my 32 never had a ploblem with it

hey all havent been on here 4 agers how this site has change i like the new look still a great site. keep those galant lancer and sigmas alive

cool galants i like the gd/gc but i really like the GB go the mighty GB

ok cool i didnt think they came out with efi thinking of doing something like that to my other gb ive got

this is going to b a cool ga when u r finished what is that motor out of and did u have to do anything to the firewall

good find looks prity strait what u going to do to it

welcome mate

my gb had drums i used gh siga struts discs and calipers and just used the original master cylinder but from what i can remember u carnt use the standed rims as the calipers hit inside the rims i dont know about gc struts but gh siga u get abit of neg camber

also like to say big thanks to Guy (the green GA) who came from port macquarie (3 hour drive) to get to newcastle for the cruise. hope you guys had a good run back up to port :thumpsup: True that. Your car is a really good package. Thought it would have made a little more noise than it did though.....

hey all just need some info on diff centers im planing to put a 10 bolt scorp diff disc brake rear in my gb im wanting to put a lsd diff center in it ive heard that some mitsu vans had them but i not sure if any one knows if its true what type of van eg L200 ect that would b good thanx

thats true ive never seen a standed console in a gb galant i was going to put a lancer one in but i didnt like the look of it so i put a modified 180b one in instead

just some pics of a gb galant i bought a few weeks ago i found it on a farm paid $200 for it its complet just had to put a radiator in it had one laying around so put it in and drove it home not in bad nick not sure what im going to do with it couldnt let it go to waste was going to the scrap yard s...

hey dude i pm u with the specs of what i did to my 4g32b u need to understand what u want from your motor 4 a start do u want a high rev motor ect and how u want to drive it u can only move your tourqe band up or down the rev range for eg mine cuts in about 2300rpm and revs out to about 6500rpm. if ...

thats a cool wagon dude looks good dont see that many around

so im guessing your cheek muscles havent recovered from that run in dan's lancer pookie? you will have to bring out the bike next time and take on the lancer haha il give dan run on my bike 04 gsxr 1000 170hp 160kilo 300km/hr full yoshi system dyno power comander remapet injectors http://i979.photo...

they might, The magna rotors should bolt onto the sigma hubs, but im not sure about those calipers going straight on? Are the struts froma GH sigma with the bolt on caliper bracket? If so its not to hard to have a bracket made up to suit the caliper/ rotor combo you want. I am currently looking at ...

hey guys just need some info on discs and calipairs im running sigma struts discs and calipairs on my gb galant and wanting to up grade the discs & calipairs on it i heard that magna & skylines fit ? wanting to put ventelated and cross drilled one on it if i can. not wanting to go bigger as ...

81GL wrote:Awww thats just awesome...

Like your idea with the throttle return springs too, might have to take that idea lol

Nick.

thats cool i just thought it up one nite and made it the next day just gives u more adjustment with the spring ect

75wagon wrote:Is the person who owns the Blue GA/ GB on the site or is that another one of yours too?

the blue galant u can just see in my pics is mine as well its a gb too bought it about 3 weeks ago

i live in the port macquire area were and whens is this cruze

hey all just some pic of my gb galant some mods its got 4g32b shaved head &block port &polished blue printed counter balanced shaft removed ground crank lightend fly wheel sigma 2lt clutch crow high lift cam stage 2 oil gallerys drilled out high comp dome pistons bigger valves extractors 2&a...

hey all new to this site im a galant owner bought it from an old lady she had it since new its a on going project i live in port macqurie area looking ford to chating to people with galants/sigmas for advise ect il try to upload a few pics so laters peps