Sigma-galant.com

Hey everyone,
Just pulled the fuel tank out of my la 4 door to find it extremely rusty, im wondering if anyone knows if a lb hatch fuel tank is the same/similar?
If not ill be looking for a la tank in good condition or get a new one made. Thanks

Thanks Sigmaproject, That is very helpful.
I am in North Rothbury so Maitland is very close!

If you really want to learn how to do it properly i would find a Tafe that is still doing night classes. When i was at North Sydney Tafe doing my panel beating apprenticeship they were running restoration classes at night, it was cheap and you could even bring in your own car and work on it with all...

Hey everyone, i just got another La lancer.....finally. I have just moved to the Hunter Valley NSW and need a mechanic. The lancer i bought has a 1.8l turbo engine 4g32. It has been sitting for 20 years so needs some work to get it going again. Any help would be appreciated. I can travel to sydney i...

im selling my lb with a lv turbo diff already cut down for only $500

could someone put a link to a thread about sigma struts into a lancer conversion? iv been looking but its hard to find a good thread.

The best advise i can give is to take your time with every part of the job! If you spent extra time making your patch it will be easier to weld and if its easier to weld it is easier to grind your welds (take it slow so you dont heat and warp the panel and dont grind to much off or you will make the...

will the hopper stopper kit fit my lancer? i would assume i would need to use the gh green struts?

pistorf do you think your love of acrylic is biased to your obvious experience and long time use of it? what brand of 2 pac do you use? another option is water based paint. not sure on legal requirements to spray but it is supposed to be better for the environment and as good as 2 pac. its used all ...

a good painter will get as good a job if not better with 2 pac as anyone can with acrylic and it will last alot longer and be easier to maintain.
the amount of peel you get depends on a range of things from thinning ratios to heat and air pressure.

from what i can la and lb front end is the same so you should not need to change any panels just swap the bars and indicators.
still looking for a reasonable la rear bar so i can try it on, if anyone has one they are selling please let me know.

on the lb the indicators are in the front bar but on the la they are below it. as far as i know you just have to get the lights i will have a look at mine and let you know if thats all you need.

you could dry it with a chamois if you have one

we use POR15 at work, its easy to use and we have never had a problem with it.

just wondering what people think this motor and box is worth?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :MESELX:IT

i know the front will fit but you do need the lights aswell. not sure about the rear, would like to know as i am about to buy one to try on.

Hi everyone, my name is Chris and i have a 77 lancer, i have just put a sr20 in it but am having trouble finding somone who will help me with some custom brakes so i can get it registered. i am a panel beater so have given my lancer a red paint job. i come and go from time to time when i find the ti...

has anyone put a la rear bar on a lb (sedan)?would be good to not have the plastic bar ends.

thanks heaps for all the help i have put a sr20det in the lancer, so engineer says it needs similar brakes as a 180sx. i looked at the dba catalouge it says it has 280mm front and 258mm rear. the diff i am using is a vl turbo diff that is already cut down but for some strange reason the person that ...

i have already talked to an engineer and he want the rotors about 280mm.
do the sigma rear discs bolt up to the lancer diff or do you need to do some mods to the diff or brakes?
and how big are they?
thanks for such a fast reply dan

are there any upgrades that use a bigger rotor i would like about 280mm diameter

if you cannot spray the back of the panel after it is welded you can buy zinc rich primer that will not burn if you dont heat it up to much. try a local paint or welding shop if not make the patches and take them to a panel shop.